
Use a compact dual-band (L1/L5) patch antenna for GNSS receivers to reduce size without compromising performance.

Directional couplers using microstrip technology on high-permittivity substrates can help you achieve gigahertz RF power measurement in tiny SMT packages.

Designers need flexible and application-focused analog front-end, motion-control, and authentication ICs to realize point-of-care medical test benefits.

Learn how to use edge AI to extend battery life in wireless motor-monitoring applications.

This innovative redesign of the classic snap-action limit switch is smaller, automotive-compatible, and can be activated from any push angle.

Even efficient AC/DC power converters need cooling; fully sealed units offer physical integrity and are cooled by physical contact with a “cold wall.”

A function generator can generate high-precision sine waves and arbitrary waveforms by adding digital predistortion and output feedback.

Pulse droop is challenging for radar systems even when using efficient GaN power amplifiers; therefore, its two primary causes must be understood and managed.

Electro-optical components are at the core of LiDAR, which uses laser pulses to create a three-dimensional “point cloud” rendition of the surroundings.

Designers can use efficient, transformer-based digital isolators for high-speed data transfers while ensuring system and user safety.

A precision data-acquisition system requires careful component selection, a deep understanding of error sources, and isolation of both signal and power paths.

Using a unique Pass-Thru mode, designers can increase efficiency and reduce EMI in a buck-boost DC/DC controller under certain conditions.

Selecting the right photoelectric proximity detectors for factory automation can accelerate setup and provide higher performance and enhanced accuracy.

How to select and use EMRs for versatile, reliable, flexible, and consistent switching and routing of signals ranging from DC through gigahertz RF.

Use a feature-rich switching IC to simplify meeting the performance objectives and regulatory mandates of a low-power AC/DC converter.

An intelligent power-device switch can offer system-level benefits beyond what a basic MOSFET switch and fuse-based protection can provide.

The classic electromechanical relay features attributes that allow it to solve challenging interface issues elegantly.

Current-sense resistors are specialized devices with very low resistance values and temperature drift, characteristics essential for accurate power measurement.

By using the ADA4510-2 precision op amp with its proprietary trimming technologies, designers can greatly simplify analog front-end design.

The Altivar Soft Starter ATS480 is critical for the smooth start and stop of multi-horsepower AC motors and features robust connectivity and cybersecurity.