NewProducts

New Manufacturers

Featured

Recently Added

Image of Delta Industrial Automation's DOP-100 Series HMI
DOP-100 Series HMI

Delta’s DOP-100 series human machine interface is equipped with more than one COM port and an Ethernet port and features a multilingual input function.

Image of Carlo Gavazzi's SCTL55 Smart Configurator
SCTL55 Smart Configurator

Carlo Gavazzi's SCTL55 is a portable, self-powered, and user-friendly smart configurator for IO-Link sensors which accesses the sensor data.

Image of ON Semiconductor's FUSB251 Type-C™ CC and SBU Protection IC
FUSB251 Type-C™ CC and SBU Protection IC

ON Semiconductor's FUSB251 is a controlled overvoltage protection switch on CC and SBU pins in a Type-C™ interface port.

Image of Renesas/IDT's Blood Glucose Meters
RX231 MCU for Blood Glucose Meters

Renesas’ RX231 MCU provides an interface for the BLE module, touch sensing, LCD control, and USB communication, all-in-one package.

Image of STMicroelectronics ADC120IPT 12-bit A/D Converter
ADC120IPT 12-bit Analog-to-Digital Converter

STMicroelectronics’ ADC is a low-power, eight-channel pure CMOS 12-bit analog-to-digital converter.

Image of EPC's EPC2111 30 V eGaN® Transistor Half-Bridge
EPC2111 30 V eGaN® Transistor Half-Bridge

EPC's EPC2111 eGaN® half-bridge enables 12 V to 1.8 V system efficiency over 85% at 5 MHz at 14 A output reducing costs to end user’s power conversion systems.

Image of STMicroelectronics’ VIPer26K High Voltage Converter
VIPer26K High Voltage Converter

STMicroelectronics’ VIPer26K high voltage converter integrates a 1050 V avalanche-rugged power section with a PWM current-mode control.

Image of Gardtec's Wire Form Stainless Steel Finger Guards
Wire Form Stainless Steel Finger Guards

GardTec's 304 stainless steel fan guards are well-suited for harsh environment applications and offer the rugged design needed to power through challenges.

Image of STMicroelectronics LSM6DSRTR iNEMO Inertial Module
LSM6DSRTR iNEMO Inertial Module

STMicroelectronics’ LSM6DSR is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope.

Image of Digilent's Blank Canvas Prototyping Surface
Blank Canvas Prototyping Surface

Digilent's Blank Canvas prototyping surface is designed to connect to the Analog Discovery Studio via standoffs.

Image of Directed  Energy's PCM-7140-10 Laser Diode Driver
PCM-7140-10 Laser Diode Driver

Directed Energy's PCM-7140 is designed to drive laser diodes, bars, arrays, or any low-impedance load for laboratory, research, and industrial applications.

Image of Directed  Energy's  PCM-7140-1 Laser Diode Driver
PCM-7140-1 Laser Diode Driver

Directed Energy's PCM-7140 is designed to drive laser diodes, bars, arrays, or any low-impedance load for laboratory, research, and industrial applications.

Image of Digilent's Screw Terminal Adapter for OpenLogger
Screw Terminal Adapter for OpenLogger

Digilent's adapter provides screw terminal block access to 8 analog inputs, 8 digital I/O, waveform generator, power supplies and ground signals to OpenLoggers.

Image of Panasonic's Y5BH Series FPC Connectors
Y5BH Series FPC Connectors

Panasonic's Y5BH series FPC connectors are impedance matching connectors that can accept both FPC and FFC with a 0.5 mm pitch.

Image of Wurth's Fixed Metal Plate Resistors
Fixed Metal Plate Resistors

Würth Elektronik's fixed metal plate resistors are available in two different product series and are suitable for a wide range of current sensing applications.