Refine Search
Filter Options Stacked Scrolling
Eval Board
Voltage Out
Current Out
Protocol
Voltage In
Current In
Standard(s)
Features
Frequency
No-load Input Power @ Conditions
Efficiency @ Conditions
Component Count + Extras
Design Author
More Filters

Designs (5)

5 Results - Page 1/1
Schematic View Design
Power Management > Inductive Charging / Wireless Power EPC9114(#2): 10W, Class 2, Rezence (A4WP) Compatible Manufacturer: EPC

The EPC9114 wireless power demonstration system is a high efficiency, A4WP compatible, Zero Voltage Switching (ZVS), Voltage Mode class-D wireless power transfer demonstration kit capable of delivering up to 10 W into a DC load while operating at 6.78 MHz (Lowest ISM band). The purpose of this demonstration system is to simplify the evaluation process of wireless power technology using eGaN® FETs…

Schematic View Design
Power Management > Inductive Charging / Wireless Power BQ51013AEVM-764(#2):Wireless Power, WPC-Certified Manufacturer: Texas Instruments

The bq51013AEVM-764 evaluation module (EVM) demonstrates the receiver portion of the bqTESLA™ wireless power system. This receiver EVM is a complete receiver-side solution that produces 5 V out at up to 1 A when coupled with the bqTESLA™ transmitter.

Schematic View Design
Power Management > Inductive Charging / Wireless Power BQ51013AEVM-765(#1): 5V @ 1A, 4 ~ 8V in Manufacturer: Texas Instruments

The bq51013AEVM-765 wireless power receiver evaluation kit from Texas Instruments is a high-performance, easy-to-use development kit for the design of wireless power solutions.

Schematic View Design
Power Management > Inductive Charging / Wireless Power EPC9113(#2): 16W, Class-D, Rezence (A4WP) Compatible Manufacturer: EPC

The EPC9113 wireless power demonstration system is a high efficiency, Rezence (A4WP) compatible, Zero Voltage Switching (ZVS), Voltage Mode class-D wireless power transfer demonstration kit capable of delivering up to 16 W into a DC load while operating at 6.78 MHz (Lowest ISM band). The purpose of this demonstration system is to simplify the evaluation process of wireless power technology using …

Schematic View Design
Power Management > Inductive Charging / Wireless Power EPC9111(#2): 35W, Class 3, Rezence (A4WP) Compatible Manufacturer: EPC

The EPC9111 Wireless power demonstration system is a high efficiency, A4WP compatible, Zero Voltage Switching (ZVS), Voltage Mode Class D Wireless Power transfer demonstration kit capable of delivering up to 35 W into a DC load while operating at 6.78 MHz (Lowest ISM band). It includes an amplifier board (EPC9506) with a pre-regulator that limits the output current and voltage and ensures proper …

5 Results - Page 1/1