World’s largest selection of electronic components

• Single or Dual 64-bit Arm® C-A35 TZ core @ 1.5GHz 
• Powerful Neural Processor (1.35 TOPS NPU) 
• AI tools to run across the CPUs, GPU and NPU

TE Connectivity’s wire-to-board and wire-to-wire high current interconnect (HCI) connector system is available in 4.0 mm and 6.2 mm centerline pitch. The connector system offers straight connector mounting with through-hole (DIP) PCB termination, and the square-peg technology.

Amphenol LTW offers the push-pull M12. The MPronto-12 plug mates with all M12*1.0 sockets compliant to IEC 61076-2-101 regardless of the manufacturer. It meets IP67, IP68, and IP69K ingress protection and supports M12 A, B, D, K, L, S, T, and X codes.

Isabellenhütte's low-ohmic precision and power resistors are ideal for when extremely high reliability, precision, and longevity are required. Isabellenhütte has supplied measuring resistors for the aerospace industry for over twenty years.

• 5A 200V FRED Pt®, Ultrafast rectifier in DFN 3820A package
• Dimensions of 3.8 mm × 2.0 mm with typical height of 0.88 mm
• AEC-Q101 and Vishay automotive grade available
• For high frequency inverters, DC/DC, freewheeling diodes, polarity protection, clamping and snubber

SW1 Wire-to-Board/Wire-to-Busbar Interconnects incorporate COEUR socket technology which enables a high-current-carrying capacity in three sizes: 6.00mm (120.0A), 8.00mm (185.0A) and 11.00mm (300.0A) with a unique positive-locking design for secure mating.

• When signal integrity and timing accuracy are paramount 
• Ultra-Low Jitter performance: 50fs Typical 
• Low Power Consumption: 15mA typical for LVDS outputs

• Ideal for complex industrial tasks 
• IP67/69K ratings 
• Red laser tech for precise detection 
• Handles diverse colors & shapes

The DK1 series is a Y1 safety approved, general purpose resin molded surface mount capacitor ideal for low profile, compact AC/DC switch mode power supply applications.

Honeywell's MPR series is a 5 mm x 5 mm piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is designed to meet the requirements of higher volume applications

Terminate wires with or without ferrules directly, effortlessly, and tool-free with innovative Push-X technology. The stripped wire is inserted directly into an open terminal position, releasing the spring mechanism. An audible click confirms to the user that the connection is secure.

The AD4080 is a high-speed, low noise, low distortion, 20-bit, Easy Drive, successive approximation register (SAR) analog-to-digital converter (ADC). Bringing lower power and better DC precision benefits of SAR ADCs to higher speeds.

• 2MOPP, 250 VAC working voltage isolation 
• -40°C to +90°C operation, no derating 
• Up to 5 kVAC/1 min reinforced insulation
• IEC/EN/UL 60601 and 62368-1 certified

The HVMA series of flyback transformers offers high isolation and a compact footprint on the pcba. It is rated for up to 2W of power and is ideal for isolated power for gate driver chips. It is fully automotive approved.

Low-profile high-power inductors with magnetic shielding allowing them to be located adjacent to sensitive circuits, enabling higher-density designs. They achieve greater inductance and current with less overall volume for unobtrusive placement between tiny devices.

3M EMI Absorber AB8000 Series is a high-temperature magnetic EMI absorber for suppressing near-field EMI noise from 300 MHz to 4 GHz. The absorber features a layer of silicone resin with magnetic fillers and offers temperature resistance up to 150°C.

3PEAK’s TPL8032 series 300 mA high PSRR, ultra-low noise, and low-dropout linear regulator features a 20 V wide input voltage range. The series supports adjustable output voltage ranging from 1.22 V to 18 V with an external resistor divider and fixed output voltage ranging from 1.5 V to 5 V.

Since 1924, Cole Hersee has been a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry – collaborating on many industry standards and earning a reputation for quality and value.

MPS MPM54313 triple 3 A, fully integrated power modules with I²C interface offer a complete power solution. They feature built-in power-on/-off sequencing control, configurable soft start (SS), compensation, and various protection thresholds.