Advanced Thermal Solutions Inc

108,000 種 pushPIN™ 散熱片

ATS 為 DigiKey 獨家推出超過 108,000 種組合的 PushPIN™ 散熱片

ATS 的 pushPIN™ 散熱片圖片Advanced Thermal Solutions 具有超過 108 K 種推入式插銷散熱片組件配置，提供市面上最豐富的推入式插銷散熱片產品組合。涵蓋專為高速氣流所設計的精細和超細間距散熱片，以及專為低速氣流條件所設計的寬間距散熱片。ATS pushPIN™ 散熱片系列提供直鰭型、交錯式和超高效能的 maxiFLOW™ 鰭片幾何形狀，能符合 25 mm 至 70 mm 元件尺寸的多種應用。推入式插銷提供黃銅和塑膠材質選項，並提供不同的壓縮彈簧，能達到穩固安裝所需的精準力道。

  • 可選擇專為達到高速氣流的 112 精細間距的散熱片，或是適合低速氣流情況的 98 寬間距散熱片。
  • 推入式插銷在尾端具有彈性鉤刺，能與 PCB 上預留的孔洞齧合。
  • 壓縮彈簧能添加必要的力道以固定組件達到穩固的安裝。
  • 推入式插銷提供黃銅和塑膠材質選項，並提供 10 種尺寸，此外也提供不鏽鋼硬體套件，能達到更穩固的安裝。
  • 輕量鋁製的散熱片是以 AL6063 擠壓成形以實現最佳的傳熱效果，並採用藍色陽極氧化塗層
  • 散熱片預先裝配有相變材料，以提高散熱性能。有雙面熱敏膠帶和無散熱界面材料兩種選項以滿足特定應用的要求

搜尋工具：pushPIN™ 散熱片搜尋工具

pushPIN™ Heat Sinks

圖片製造商零件編號說明現有數量價格
HEATSINK 25X25X10MM L-TAB CPATS-CPX025025010-137-C2-R0HEATSINK 25X25X10MM L-TAB CP4978 - 即時供貨$27.41查看詳情
HEATSINK 25X25X10MM R-TAB CPATS-CPX025025010-165-C2-R0HEATSINK 25X25X10MM R-TAB CP368 - 即時供貨$27.41查看詳情
HEATSINK 25X25X15MM L-TAB CPATS-CPX025025015-138-C2-R0HEATSINK 25X25X15MM L-TAB CP1139 - 即時供貨$28.32查看詳情
HEATSINK 25X25X15MM R-TAB CPATS-CPX025025015-166-C2-R0HEATSINK 25X25X15MM R-TAB CP554 - 即時供貨$28.32查看詳情
HEATSINK 25X25X20MM L-TAB CPATS-CPX025025020-139-C2-R0HEATSINK 25X25X20MM L-TAB CP852 - 即時供貨$29.14查看詳情

Accessories

圖片製造商零件編號說明現有數量價格查看詳情
HEATSINK PLASTIC PIN/SPRING 1=2ATS-HK127-R0HEATSINK PLASTIC PIN/SPRING 1=217693 - 即時供貨$15.15查看詳情
HEATSINK BRASS PIN AND SPRINGATS-HK91-R0HEATSINK BRASS PIN AND SPRING0 - 即時供貨$22.31查看詳情
HEATSINK PEM SPRING AND SCREWSATS-HK76-R0HEATSINK PEM SPRING AND SCREWS554 - 即時供貨$47.83查看詳情
HEATSINK MUSIC WR SPRING 3.73MMATS-PPS-04HEATSINK MUSIC WR SPRING 3.73MM950 - 即時供貨$1.73查看詳情
HEATSINK BRASS PUSH PIN 14MMATS-PP-06HEATSINK BRASS PUSH PIN 14MM6421 - 即時供貨$8.07查看詳情
發佈日期： 2014-10-30

Related Videos

MEMS Oscillator ruggedness vs quartz part 2
MEMS Oscillator ruggedness vs quartz part 2

發佈日期：2018-03-13

MEMS Oscillator ruggedness vs quartz part 1
MEMS Oscillator ruggedness vs quartz part 1

發佈日期：2018-03-13

ATS Explains - Thermal Interface Material
ATS Explains - Thermal Interface Material

發佈日期：2018-01-26

Related Product Highlight

散熱片附件解決方案 Advanced Thermal Solutions 的散熱片附件為工程師提供多種選項，可將幾乎任何散熱片機械地附加到 PCB 上。
maxiFLOW™ pushPIN™ Heat Sink ATS' maxiFLOW heat sinks include an integral pushPIN mounting system for fast, safe attachment of the heat sinks onto BGAs and other hot components.

Related Articles and Blogs

Thermal Conductivity: What is it and Why You Should Care A discussion on thermal conductivity, how to calculate it, and how to best remove heat energy from electrical components to prolong their lives.
Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
pushPIN Heat Sink ATS’ pushPIN compression springs add the necessary force to hold the assembly together for secure attachment.
maxiFLOW™ Heat Sinks maxiFLOW heat sinks feature a low profile spread fin array that maximizes surface area. Available in a wide variety of sizes and shapes.

Related Video

How to Install Push Pin Heat Sinks ATS has expanded its line of push pin heat sinks, now providing straight fin, cross cut, and maxiFLOW heat sink configurations for a wide range of component sizes.