訂購產品一般會在 3-4個工作日內送抵香港 (視地點而定)。
訂購金額達 港幣$330或以上即可免費運送至香港。 訂單金額低於 港幣$330則需收取運費 港幣$125。
UPS、FedEx 或 DHL 運費預付: CPT (相關稅賦與關稅在送達時收取)
合格機構與公司的信用帳戶
電匯預先付款
![]()
![]()
![]()
![]()


來自完整授權夥伴的更多產品
平均到貨時間為 1 至 3 天,可能需支付額外運費。 請參見產品頁面、購物車與結帳畫面瞭解實際的運送時程。
國貿條規:CPT (關稅和適用的 VAT/稅賦會在送達時收取)
如需更多資訊,請造訪說明與支援
Hello! My name is Tyler Marston and I am the Digi-Key Campus Ambassador for Syracuse University. I am a senior electrical engineering student who plans on pursuing a master’s degree in electrical engineering. Some of my interests include space travel, nuclear power, and microelectronics.
This is the final post for Team Syracuse’s Summer Design Project. Please see the previous posts, Part 1 and Part 2, for reference.
This is a continuation of Team Syracuse’s summer design project, which was described in Part 1.
In this post I will be detailing how my team has gone from concept to action plan for our summer design project.
2 Wheel Robot that uses an Arduino Nano to balance itself. This is a great project for anyone who is looking for practice with control systems.
In this short post, I will be introducing image processing using a Raspberry Pi.