訂購產品一般會在 3-4個工作日內送抵香港 (視地點而定)。
訂購金額達 港幣$330或以上即可免費運送至香港。 訂單金額低於 港幣$330則需收取運費 港幣$125。
UPS、FedEx 或 DHL 運費預付: CPT (相關稅賦與關稅在送達時收取)
合格機構與公司的信用帳戶
電匯預先付款
來自完整授權夥伴的更多產品
平均到貨時間為 1 至 3 天,可能需支付額外運費。 請參見產品頁面、購物車與結帳畫面瞭解實際的運送時程。
國貿條規:CPT (關稅和適用的 VAT/稅賦會在送達時收取)
如需更多資訊,請造訪說明與支援
The Adafruit Feather are a complete line of development boards from Adafruit Industries that are both standalone and stackable. They're able to be powered by lipo batteries for on-the-go use or by their micro-USB plugs for stationary projects. Adafruit also offers a line of accessories and Feather Wings to stack boards and add room for prototyping. At its core, the Adafruit Feather is a complete ecosystem of products.
Getting Started
Other Resources
Products
A comprehensive comparison of Python, MicroPython, and CircuitPython, including origins, syntax, and applications.
Learn how to use a BNO085 breakout board with an ESP8266 to read movement and orientation data using the Arduino IDE.
This article serves as an introduction to ultrasonic sensors and explains how you can get them up and running in no time using an ESP8266 development board.
This week, on Maker Update: how to wire your animatronic wings, a 3D printed Zelda Master Sword, translation windows, and the best LED strip you’ve never heard of.
This week on Maker Update: all the darts, all at once, 3d space mice, robot parts, big displays, and leaky prints.
This week on Maker Update: bringing your own baby Wall-E to life, Hackaday’s Op Amp challenge, a new twist on the video synthesizer, and adding animations to backlit panels.
請造訪本網站的「說明與支援」,取得訂購、出貨、運送等相關資訊。
已註冊使用者可在帳戶的下拉式選單中追蹤訂單狀態,或按此查看。 *訂單狀態可能要在下訂單後 12 小時才會更新。
使用者可在退貨頁面中開始辦理退貨流程。
已註冊使用者可在 myLists 中建立報價單。
請前往註冊頁面,然後填入必要資訊。 註冊完成後,會收到確認電子郵件。
訂購產品一般會在 3-4個工作日內送抵香港 (視地點而定)。
訂購金額達 港幣$330或以上即可免費運送至香港。 訂單金額低於 港幣$330則需收取運費 港幣$125。
UPS、FedEx 或 DHL 運費預付: CPT (相關稅賦與關稅在送達時收取)
合格機構與公司的信用帳戶
電匯預先付款
來自完整授權夥伴的更多產品
平均到貨時間為 1 至 3 天,可能需支付額外運費。 請參見產品頁面、購物車與結帳畫面瞭解實際的運送時程。
國貿條規:CPT (關稅和適用的 VAT/稅賦會在送達時收取)
如需更多資訊,請造訪說明與支援
感謝您!
時常檢查您的收件匣,取得 DigiKey 的最新消息與通知!
請輸入電子郵件地址