Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Product List
precision-slide16

The two edges of a cutter must be in close alignment to get the best cutting performance. Listening for the “snap” of a good cut and looking for the straight flight of the small wire chip check edge alignment. A poor cut will have a limp sound and will pull or bend the test wire to one side. 

PTM Published on: 2011-08-26