The ABLIC ZCL Hall Effect IC changes the signal output at the point polarity changes, without depending on the magnitude of the magnetic flux density. Hall effect IC for BLDC motor control applies the magnetic flux density from rotating magnets.

ABLIC S-19255 accommodates the demand for smaller camera modules to enable installation of the ever-growing number of camera modules that systems such as Advanced Driver Assistance (ADAS) and Autonomous Driving (AD) require.

Downsizes backup capacitor/battery size with the industry's lowest operation voltage. The ABLIC S-19990 is the industry’s lowest operation voltage of 3V for a 36V operation step-up switching regulator controller. Reduces standby current.

Since the ABLIC S-19222 Series can be used with CIN 0.1μF and COUT 1.0μF input/output capacitors, it helps make customer products more compact and lower cost. The industry's highest PSRR helps deliver a stabilized power not impacted by input noise.

Single chip for handling requirements of a multifunctional MCU. The increasing functionality of MCUs & automotive devices has increased the amount of current they require. The S-19516/7/9 is equipped with an LDO regulator capable of handling 500mA.

With the increasing multi-functionality of automotive cameras, antennas and sensors, S-19682/3 Series with its capability to offer connection diagnosis of a variety of applications is a Small, Space, Flexible solution that makes it all work.

The ABLIC S-19400 provides enhanced design flexibility since it can be pin selected to operate in either window or timeout modes. In “timeout mode” the timer signals a fault condition when the microcontroller inputs are too slow.

Window detection monitors undervoltage and overvoltage. The ABLIC S-191A is a window voltage detector capable of monitoring undervoltage and overvoltage. With the ABLIC S-191A / S-191B it is possible to set the detection voltage for undervoltage.

In ADAS, the ability of ICs to notify the outside world of their own abnormalities contributes to further improvements in safety design. The ABLIC S-19721 has an anomaly notification that detects its own abnormal activity and outputs its status.

Supporting the achievement of functional safety. The appearance of autonomous driving have made it imperative that ECUs in automotive systems provide a variety of monitoring functions to support functional safety.