This video discusses the DCM3717 converter modules from Vicor, which deliver efficient 48V to 12V conversion in a compact format. These modules provide high-density power for modern applications with simplified integration.

The Vicor DCM Series are Isolated, Regulated DC-to-DC Converters operating from an unregulated, wide range input to generate an isolated output.

Vicor has been powering railways for decades and has been consistently adapting to changing power demands. Modern rail infrastructure presents challenges for designers of both freight and commuter solutions.

Vicor’s BCM line of high-efficiency bus converter modules along with the zero-voltage switching (ZVS) buck regulators can form the backbone to support high-voltage UAV tether transmission.

Vicor’s BCM4414 Ultra-High Voltage Bus Converter Modules, are unique, high-efficiency, ultra-low converters that operate from 260 to 410 Volts DC.

Welcome to First Look, brought to you by DigiKey and Vicor. As power levels increase in data center, industrial, automotive, and other applications, designers are turning to 48V power delivery to reduce I2R losses in the power distribution network.

The DCM3717, from Vicor, is a highly-efficient, high-performance 48 volt to 12 volt, non-isolated, regulated converter module.

The DCM4623 family of isolated and regulated DC-to-DC converters, from Vicor, consistently delivers high-efficiency across the input voltage range.

VICOR Power provides the power solution to the ever-changing demand of powering Robots for Harvest, Delivery and Moving Robotic needs.

Vicor's DCM2322 series offers engineers wide input voltage ranges of 43 V to 154 V, 14 V to 72 V, and 9 V to 50 V with power levels ranging from 35 W to 120 W and efficiencies up to 90.8%.

This presentation will provide an overview of Vicor’s VI BCM modules, beginning with a review of the Sine Amplitude Converter™ topology and a review of the converter module specifications.

Vicors NBM2317 ist ein nicht isolierter Gleichspannungswandler mit festem Verhältnis.

NBM2317 from Vicor is a bridging converter for 48 V and 12 V systems delivering 800 W at 97.9% peak efficiency. The converter uses a unique switching topology and packaging to enable a high density, high efficiency, and low cost.

Why 48V is now becoming the new Buss voltage distributing power at a higher efficiency

The ChiP DCM is an isolated, regulated DC-DC converter module that can operate from an unregulated, wide-range input to generate an isolated DC output.

Vicor's range of buck and buck-boost DC-DC converters use a Zero-Voltage Switching (ZVS) topology, enabling high frequency operation while minimizing switching losses and maximizing efficiency.

New tool enables designer to quickly and easily specify, architect, analyze and configure complete, performance optimized, compact, multi-output power systems in minutes.

Start your power system design today using Vicor’s new PowerBench™ tool, the Power System Designer. Search and build complete power system in a matter of seconds.

A quick look at using Vicor's PFM and AIM in VIA packaging for your AC to Point of Load power and overcoming changes in your design by using the Power Component Design Methodology.