STEVAL-Proteus1 Unboxing [1] | DigiKey

Inside the kit you will find the STEVAL-PROTEUS main board based on an ultra-low-power 2.4 gigahertz wireless module that is Bluetooth Low Energy 5.3, Zigbee 3.0, and OpenThread certified and can support other 802.15.4 protocols. A LiPo battery and a plastic case with hardware round out the kit. It has a 64 megahertz Arm Cortex-M4 and large memories for running embedded algorithms at the node level, and a 32 megahertz Arm Cortex-M0+ for the real-time radio layer. Follow the video for assembly and setup including installation of the ST BLE Sensor app from phone app store. The app connects to the PROTEUS board and displays sensor readings, various data plots, predictive maintenance analysis, complete OTA firmware upgrades, and more.

STEVAL-PROTEUS1 DigiKey Product Page

STEVAL-PROTEUS1 Product Features Maker.io - https://www.digikey.com/en/maker Digi-Key’s Blog – TheCircuit https://www.digikey.com/en/blog Connect with Digi-Key on Facebook https://www.facebook.com/digikey.electronics/ And follow us on Twitter https://twitter.com/digikey

DigiKey's Main YouTube channel - https://www.youtube.com/@digikey