Next, we will compare pulse capabilities. The chart shown here compares the specified maximum pulse power of 1206-sized RCA-HP series parts (brown) versus that of standard 1206-sized thick film resistors (blue). To make this comparison, the single pulse capability charts found within the Vishay product datasheets which allow for up to 1,000 pulses were used. As the graphic on this slide illustrates, the RCA-HP series part has much higher pulse capabilities compared to the standard thick film part. For long pulse durations from 1 to 10 seconds, the RCA-HP type with size 1206 can handle two to three times as much pulse power compared to the standard part. For very short pulse durations in the 1 µs to 10 µs range, the RCA-HP with size 1206 can handle five to seven times as much.