Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Product List
Phase Change Materials (cont’d)

In use, the PCM will initially form a dry-joint. However, as the operating temperature increases the materials will flow under temperature and applied pressure to give an intimate thermal joint. The next time the device is powered up there will be no delay in achieving good thermal management as the thermal joint has already been established. T-Global has designed and developed a range of PCM materials which are perfect for EV battery cooling.

PTM Published on: 2013-05-21