Screwless spring-clamp blocks are designed to simplify installation and save time and labor. They are available for stranded and solid wires from 22 – 8 AWG. Individual spring contact clamps are depressed to insert a wire by using a screwdriver. Once released, the spring clamp maintains a consistent, high pressure contact against the wire. Feed-through blocks are available in three sizes with pitches ranging from 5mm – 8mm. Voltage ratings are up to 800 V with amperage up to 50A. Multiple connection screwless spring-clamp feed-through blocks feature one or two contact points per side for enhanced density and system convenience, and reduce the need for bussing clips. Feed-through blocks are available in five sizes with wire gauges ranging from 22 – 8 AWG and pitches between 5mm and 8mm. Voltage ratings are up to 800V with amperage up to 50A. Angled screwless spring-clamp feed-through blocks provide a compact interconnect system and convenient circuit identification for space-sensitive junction box applications. Blocks are available in single and multiple termination variations, for wire sizes 22 – 12 AWG. Angled spring blocks are available in two sizes with pitches ranging from 5mm – 6mm. Voltage ratings are up to 800V with amperage up to 32A. Please check the customer drawings or website for CSA, VDE, and UL approval on these products.