Smart Grid

	Smart Meter	Wind Turbine	UPS Connectors
	Switch Gear, Protection Relays Circuit Breakers	Battery Storage Systems

Battery Storage Systems

Creating advanced technology for power supply infrastructure is a complex task, involving a web of interactive signals, precise communication, mechanical functioning, and electric power transmission. Hirose Electric, a leader in new technology, provides solutions for your cutting-edge designs.

Hirose offers connectors for Smart Meter, Wind Turbine, UPS, Switch Gear/Protection Relay/Circuit Breaker, and Battery Storage System applications.

Smart Meter connectors from Hirose include RJ45, coaxial, board-to-board, wire-to-board, in-line, input-output, and FPC/FFC products. For Wind Turbine applications, we offer interface and internal connectors for power supplies. UPS applications include power line and signal line connectors, and for Switch Gear/Protection Relay/Circuit Breaker applications, Hirose provides high-speed interface, board-to-board, wire-to-board, and FPC/FFC connectors. Battery Storage Systems include plug-in, interface, service plug connectors.

Check out Hirose’s newest products, available for immediate shipment from Digi-Key.

Back Plug–In
Front Wiring
Service Plug

PS2 series, Plug-In Connectors
	Hybrid design with 100 to 300 Amps power contacts & signal contacts Floating design allows +/- 2.5 mm self-alignment around screws during mating Sequential contacts detect incomplete mating for safety Ideal for large 18650 battery packs in rack/drawer configurations Finger protection cap is provided

PS3 Series, Plug-In Connectors
	Rated up to 150 Amps with 50 mm² wire Slim design achieved by employing unique blade contact that allows applications on standard 1U rack Floating design allows +/-2 mm self-alignment around screws during mating Power contacts connect to the cable by a single screw Ideal for thin laminated batteries in rack/drawer configurations Finger protection meets IP2X requirements

PS3F series, Front access Plug-In Connectors
	Hybrid design with power and signal contacts, up to 100 Amps Front access on the plug-in side is ideal for systems without maintenance space in the back Allows assembly/wiring inside a confined space from the mating side (front) Floating design allows ± 2.5 mm alignment error Finger protection meets IP2X requirements and contributes to operator safety

GT8E series, Signal Line Connectors
	2.0 mm pitch Compact, highly reliable connectors that withstand extreme environmental conditions such as high vibration and heat Provides stable signal transmission such as battery voltage monitoring Wide variations; SMT/DIP, single/double row, right-angle/straight/in-line

PS3C Series, Front Wiring Connectors
	150 Amps using 50 mm² wire 180 degree mating reversal allows flexible cabling Compact receptacle saves space inside battery unit Right-angle plug saves space for cable wiring Safety design with IP2X finger protection Guide key and color coding prevents mis-mating between positive and negative leads

EM12M Series, Front Wiring Connectors
	90 Amps using 22 mm² wire Quick and secure snap-in lock mechanism Safety design with finger protection Crimp termination with commercially-available crimp tool Keying and colored housings prevent mis-mating

DF60 Series, Front Wiring Connectors
	38 Amps (6pos) - 45 Amps (1pos) using 8 AWG to 12 AWG Secure mating with clear tactile click Highly reliable 5-point contact with independent contact springs Keying variations available

EM30MSD Series, Manual Service Disconnect Plug
	200 Amps capability with small size Disconnects power and improves operator and battery system safety during maintenance. Signal contact with interlocking switch to detect mating status Shock resistant multi-contact and bayonet lock systems IP68 water resistant Safety design with IP2X finger protection