Product Training Library

We take a look at the XBee XR 900 Development Kit from Digi. With a line of sight range up to 10.5 miles, the XBee XR is well suited for creating point-to-point or mesh networks in agriculture and energy applications.

This video discusses the analog (SSA ) and digital (SSD) shunt based current sensors from Bourns. These sensors support high-accuracy monitoring with isolation and flexible communication.

We take a look at the SENSEVAL-SCB4XV1 from Sensirion, which offers a combination of sensors from Sensirion and STMicroelectronics to measure indoor air quality.

This video discusses the KSC2 Dual Circuit Technology (DCT) tactile switch from Littelfuse. This high-performance, IP67-rated switch is designed for industrial, consumer, and automotive applications.

We take a look at the Curiosity Platform Development Board from Microchip, an easy-to-use and flexible platform for developing with Microchip dsPIC33A DSCs and PIC32A MCUs.

We take a look at the Type 2DT module evaluation kit from Murata.

We take a look at the Harmony XB5R wireless and batteryless pushbutton switches from Schneider Electric, increasing remote control freedom and mobility in industrial automation.

We take a look at the NCP1345 USB-PD 65W Evaluation Board from onsemi. It leverages multiple onsemi ICs to enable low cost, low standby power and high efficiency power adapters for smart phones, laptops and other devices.

This video discusses vacuum-brazed high-performance liquid cold plates from Wakefield Thermal. These next-gen liquid cold plates deliver exceptional thermal performance, lightweight design, and compatibility with power modules like SiC and GaN.

This video discusses the B3292xM3/N3 Series X2 EMI suppression capacitors from TDK. They are designed for compact EMI suppression with enhanced humidity resistance.

Nexperia advanced N-Channel application-specific field-effect transistors (ASFETs) are optimized for high-power applications such as Power-over-Ethernet (PoE), eFuse, and relay replacement.

This video discusses the RECOM Power RACPRO1 series of high-performance AC/DC power supplies designed for industrial automation, energy distribution, and infrastructure applications.

We take a look at a Discovery kit with an STM32N657X0 MCU from STMicroelectronics. It highlights the performance, efficiency, and versatility of the MCU in edge AI applications.

We take a look at the ADMT4000 Evaluation Board from Analog Devices. It showcases the ADMT4000 magnetic turn counter sensor that can count rotations without power, simplifying position sensing in industrial and automotive applications.

We take a look at the Portenta Proto Kit ME from Arduino. The kit features a large set of modular hardware to enable advanced prototyping and seamless cloud integration for a variety of motion and environmental sensing applications.

We take a look at the XENSIV Sensor Shield from Infineon. The shield features a wide range of sensors from Infineon to accelerate development of smart home devices and other sensor-driven consumer applications.

This video discusses Analog Devices' LTC7890 and LTC7891, dual-phase synchronous DC/DC switching regulator controllers optimized for GaN FET power stages. Designed for high efficiency and flexibility, they simplify power system design.

We take a look at the W10 Photoelectric Sensor from SICK. This proximity sensor provides ease of use with a touch screen display that allows simple installation, commissioning, and operation in harsh industrial environments.

We take a look at the SRP1-CR and -CB series of industrial solid state relays from Littlefuse.

This video discusses Bulgin Single-Pair Ethernet 4000 Series Connectors and Cables.

This video discusses the AxiACi series axial fans from ebm-papst, which offer reliable, energy-efficient solutions for refrigeration, industrial ventilation, and telecom applications.

This video discusses the EPC2152 Integrated ePower Stage by EPC, a single-chip driver and half-bridge power stage. It offers fast switching, robust transient handling, and a compact design for high-frequency power applications.

This video discusses Wolfspeed’s 2300 V Silicon Carbide (SiC) Power Modules. They offer ultra-low loss and high-frequency operation for compact and efficient power solutions in renewable energy, EV fast charging, and more.

We take a look at the GENIO 510 Development Kit from MediaTek. This is an evaluation kit for the advanced media and AI empowered MediaTek MT8370 platform. The Kit includes a WiFi and Bluetooth connectivity module.

We take a look at the IRIS-W106 Tri Radio Eval Kit from u-blox. This evaluation kit enables standalone operation of the IRIS-W106 multiradio wireless MCU module for seamless development of dual-band Wi-Fi 6, Bluetooth LE 5.4, and Thread applications.

We take a look at the EMI shielding tape kit from 3M.

This video discusses ecomate connectors by Amphenol. These connectors provide robust, lightweight, and waterproof solutions for industrial applications.

This video discusses the Bourns RSN series of Riedon DC ammeter shunts for accurate current measurements from 1 to 500 A.

We take a look at the SpeedVal Kit Modular Evaluation Platform from Wolfspeed.

This video discusses the RX4901CE and RX8901CE real-time clocks with digital temperature compensation from Epson. These high-precision modules are ideal for applications requiring low power consumption and multiple event timestamps.

STM32MP25 application processors offer dual Cortex-A35 cores, a neural processing unit (NPU) with 1.35 TOPS, and full HD video support. They provide edge AI acceleration, advanced multimedia, graphics processing, and digital connectivity.

We take a look at the U-OS Starter Kit from Weidmuller.

This video discusses the Digi ConnectCore MP2 industrial-grade, embedded SoM platform. This versatile, secure, wireless SOM includes an NPU and ISP for edge AI and computer-vision applications and complete Linux support in Digi SMTplus form factor.

This video discusses Infineon’s PSoC 4000T MCUs and evaluation kits. Delivering ultra-low power touch sensing with 5th-gen CAPSENSE technology, they combine low power, high SNR, and flexibility for exceptional performance in harsh conditions.

This video discusses the shielded IFDC and semi-shielded IFSC series of SMD Power Inductors from Vishay. The series offers enhanced inductance, high saturation currents, and minimized EMI for noise-sensitive applications.

We take a look at the HMI2120 Series Industrial HMI Based on Raspberry Pi CM4 from EDATEC.

This video explores TE Connectivity’s HIVONEX High-Power Charging Inlets for fast and secure quick charging of up to 500 A at 1,000 VDC. Designed for industrial and commercial EVs, they ensure safety, durability, and efficiency in harsh environments.

We take a look at the Traveo T2G Body, High Lite Kit from Infineon.

This video discusses Honeywell’s CSHV Series Open Loop Current Sensors, which feature Hall effect technology for accurate and reliable current sensing.

We take a look at the FRDM i.MX 93 Development Board from NXP. This development board provides a low cost solution for developing modern industrial and IoT applications.

This video discusses Infineon’s small signal P-channel and N-channel MOSFETs. They feature voltage ranges from -250 to +600 V, current ratings up to 8.2 A, and low RDS(on). They are ideal for automotive and industrial systems.

The PMR series power supplies from Delta Electronics offer high efficiency with built-in active power factor correction (PFC) and robust safety protection. They meet the demanding requirements of industrial automation, home appliances, and machinery.

This video discusses the PMT2 Series Panel Mount Power Supplies from Delta Electronics. These power supplies offer high efficiency (up to 91%), compact design, and universal AC input for industrial and commercial use.

This video discusses the BPS Series Battery Safety Pressure Sensors from Honeywell. It is an automotive-grade sensor that detects pressure changes that may indicate thermal runaway in electric vehicle battery packs and energy storage systems.

This video discusses the BAS Series Battery Safety Sensors from Honeywell. These automotive-grade aerosol sensors use light scattering to detect and report thermal runaway events in lithium-ion battery packs.

This video discusses the Allegro Microsystems CT455/CT456 advanced contactless current sensors, designed to deliver high accuracy and reliability in various applications.

We take a look at at the MCX W71 Freedom Board from NXP. This compact and scalable development board provides rapid prototyping and easy evaluation of the MCXW71’s multiprotocol wireless support.

This video discusses the Innergie Consumer Power Adapter Solutions from Delta Electronics. These ultra-safe, high-efficiency USB-C wall chargers are ideal for use with all of your mobile devices.

This video discusses the World Travel Plug Kit, a versatile charging accessory from Innergie. The product supports global travel, with adaptable plugs designed for easy use in over 150 countries.

This video discusses the N- and P-Channel Power MOSFETs from YAGEO XSemi. These silicon MOSFETs offer low on-resistance and high switching speeds for a wide range of industrial and commercial applications.

We take a look at the mioDAQ USB Data Acquisition Devices from National Instruments.

This video discusses Microchip Technology's wide portfolio of MEMs and crystal oscillator solutions.

This video discusses the mioDAQ USB Data Acquisition Device from NI, which provides engineers with high-accuracy measurements and seamless software integration.

This video discusses the 5113SFT series electrically conductive single-sided fabric tape from 3M, designed for EMI and RFI shielding.

This video discusses the G2RL Power PCB Relay, a next-generation relay series from Omron EMC. The G2RL series offers advanced load handling, energy efficiency, and a slim design suited for industrial and home applications.

We take a look at the PolarFire System on Chip FPGA Discovery Kit from Microchip, an open source FPGA development kit for rapid testing of industrial IoT, smart embedded vision, edge communications and other compute intensive applications.

This video discusses the gold-plated, low-profile contacts from Memory Protection Devices. These contacts offer a compact, reliable connection solution with a space-saving design ideal for modern electronics.

This video discusses the nRF9151 SiP, a cellular IoT system-in-package (SiP) from Nordic Semiconductor. It offers compact, low-power cellular connectivity for a wide range of IoT applications, integrating an LTE-M/NB-IoT modem with GNSS support.

We take a look at the Sona IF573 Wi-Fi + Bluetooth Development Kit from Ezurio. This Wi-Fi and Bluetooth development kit provides robust and secure next gen wireless IoT for industrial connectivity.

This video discusses the G9KC-4A AC Multi-Pole PCB Relay from Omron EMC, which is designed for high-power switching applications in 3-phase AC systems.

We take a look at the NCP NCV51561 Evaluation board from onsemi . This board demonstrates the fast switching performance of NCP5156X and NCV5156X isolated dual channel gate drivers designed for power MOSFETs and SiC MOSFET power switches.

This video discusses the 18650 Battery Holders and Clips from MPD, designed for secure battery housing. The versatile holders ensure dependable battery connections in compact, intuitive configurations.

We take a look at the Certus NX Versa FPGA Evaluation Board from Lattice Semiconductor, highlighting the rich features of the Certus NX FPGA.

This video discusses the BU2477SM-JJ-GTR battery holder from Memory Protection Devices (MPD). The surface mount holder is designed for 24.5mm CR2477 coin cell batteries. It is ideal for wearable devices, IoT sensors, and remote controls.

EVAL-LT7170-1-AZ evaluation kit from Analog Devices, featuring a dual phase single output monolithic DC to DC synchronous step down regulator that integrates digital power system management functionality for programming and telemetry applications.

The K6CM series of Motor Condition Monitoring Devices from Omron analyzes the performance of three-phase induction motors and alerts users to potential failures by analyzing current, temperature, vibration, or insulation resistance in real-time.

Introducing Latching Lithium Coin Cell Battery Retainers from MPD. These retainers offer a robust, low-cost solution for holding 1225, 2032, and 2450 lithium coin cell batteries in applications such as consumer electronics and handheld devices.

This video discusses the BK-17500-CLIP battery contact clips from Memory Protection Devices (MPD). These clips are designed for use with 18mm 17500 batteries and feature both SMD and THT mounting options.

We take a look at the Raspberry Pi AI Kit. This kit combines the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for integrating cost-effective, power efficient, and high performance AI in the Raspberry Pi 5.

We take a look at the MEP Series Open Frame Power Supplies from Delta, offering reliable power for type BF medical equipment with 2 x MOPP electric shock protection compliance, UL certification, and EMC approvals.

We take a look at the 3D35XK-101D LCD Display Eval Board from Grayhill. This 3.5 inch bright CAN Bus display with TouchGFX simplifies application creation and integration for off highway vehicles.

We take a look at the NRF9161 Development Kit from Nordic Semiconductor. This development kit is an affordable, pre-certified board for evaluation and development on the nRF9161 System-in-Package for LTE-M, NB-IoT, GNSS and DECT NR+.

We take a look at the Plug and Make Kit from Arduino. This starter kit introduces a fun, quick, and easy introduction into exploring the world of Arduino with user friendly hardware and software

This video discusses the Flecto Floating Connectors from Harwin Inc., a series of fine pitch board-to-board connectors designed for high pin count applications with movement in the X, Y, and Z axes of the maile connector.