World’s largest selection of electronic components

AUAV Dual Pressure Sensor

• Simultaneous airspeed (Differential) and altitude (Absolute) pressure sensing
• Compact and lightweight dual sensors in a single package weighing less than 1.5 grams [TYP]
• 18-bit high resolution I2C or SPI output interfaces for both sensors
• Leadless surface mount design compatible with SMT automated assembly

YAGEO Group TPI Series:

• Flat-wire design boosts current flow
• Low DCR and core loss for max efficiency
• Operates up to +125°C reliably
• Ideal for DC-DC, servers, supercomputers

Samtec’s AcceleRate HD ADF6/ADM6 series feature a 0.635 mm pitch, slim 5 mm width, stack heights from 5 mm to 16 mm, a 4-row design with up to 400 total positions, and a performance that supports up to 64 Gbps PAM4 (32 Gbps NRZ).

The onsemi AMR concept is a comprehensive robotics solution designed with highly efficient and innovative solutions from onsemi. The concept can be used to design various types of Robots, Cobots, Power tools and Guided Vehicles by combining different intelligent and power solutions from onsemi.

The Nexperia BUK7S series of N-channel MOSFETs are designed to meet the demanding requirements of modern automotive applications. These MOSFETs leverage Trench 9 low-ohmic superjunction technology housed in a compact LFPAK88 package, to deliver superior performance and reliability.

High voltage, high power, high speed operational amplifier optimized for driving up to ±1A at ±1300V/μs into capacitive and resistive loads. Combining a high voltage amplifier with low voltage analog circuitry and an SPI programmable digital engine, ideally suited for high voltage applications

Orion Fans' OD254AP fan is an exceptionally reliable cooling solution for hazardous environments. It's engineered to comply with UL 60079 standards for applications in EV charging, refrigeration, agriculture, oil & gas, and industrial automation.

UltraFlo fans feature advanced engineering to deliver high airflow, with low power consumption, and exceptional durability. This series offers 1U to 4U configurations, with dual-reverse impellers to meet high static pressure demands of high-density enclosures.

• VSMA1085250
• Centroid wavelength: 850 nm
• Radiant intensity up to 1700 mW/sr at I_F = 1A
• Industry leading radiant power of 1425 mW

• Convection, conduction and fan-cooled ratings
• Output voltages from 12V to 54V
• Compact, low-profile (1") baseplate-cooled design
• ITE and Medical (BF) safety approvals

• Designed using the latest sensitive hydraulic magnetic technology
• Choice of delays and ratings in either DC, 50/60Hz or 400Hz versions
• Single or multiple versions with a variety of pole arrangements
• IEG models are UL Recognized and meet IEC spacing requirements

The SCM provides remote communications support for SolaHD SDN-D series high-performance DIN power supplies over popular industrial protocols - Ethernet/IP, Modbus TCP and WiredHART. This allows key diagnostic data, alarms, and operating parameters to be remotely monitored on supervisory systems.

TDK-Lambda’s i7C non-isolated buck-boost DC/DC converters deliver up to 300 W at 97% efficiency, with wide 9 V_DC to 36 V_DC or 9 V_DC to 53 V_DC, 5 V up to 48 V adjustable output, and a compact 1/16th brick pin-out—ideal for rugged, space-limited industrial, medical, or battery-powered systems.

PolarFire® Core FPGAs and SoC FPGAs deliver industry-leading power efficiency, robust security, and exceptional reliability. Ideal for edge computing, communications, and industrial applications, they enable flexible, high-performance solutions for today’s most demanding designs.

Plastic enclosures make great junction boxes and ideal for housing controls and wi-fi devices. The knockouts easy to remove. Its continuous gasket and a tight-fitting cover create IP67 seal with washdown protection in dirty or corrosive industrial environments.

• Very tight tolerance down to ±0.02% available
• Extremely low TCR down to ±5 PPM
• High precision -Excellent stability

• 22mm diameter panel cutout, tamper-proof design
• IP65; Stainless steel or black anodized finish
• RGB LED with dot, ring or power symbol illumination
• Electrical rating of 2A, 48VDC with 50,000-cycle life

With ABS and UV-stabilized polycarbonate options available, the 1554 and 1555 series are ideal for mounting circuit boards, inner panels, DIN equipment, and more. Polycarbonate versions offer IP68 protection and opaque, clear, and smoke lid options.

TDK’s ADL4524VL inductor delivers high impedance from 10 MHz to 1 GHz, supporting efficient power and data separation in automotive PoC camera systems. Its compact size and robust design reduces component count and streamlines vehicle cabling.