SunLED 的 XZTHI56W-1 規格書

A SunLED www.5unLEDusa.ccm Package Schematics ’1" 1% %’—\_ ‘ % ~L ‘ J o 0 TE} H L ‘ 4‘ ‘03 [0.012] 0.3 [0.012] o‘s[ was] 1 H\>—c 2 .020110‘2 TOE 2.5 [sneaking 0,35 [memos [0.035]0A35 [mam] ;\ x ‘ y/ 2* ‘ ”1K Polarity Mark
Part Number: XZTHI56W-1
3.0x1.0mm INFRARED EMITTING DIODE
Mar 25,2016 XDSA5044 V9-Z Layout: Maggie L.
P. 1/4
Features
● Long life and robust package
● Standard Package: 2,000pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● RoHS compliant
Package Schematics
Absolute Maximum Ratings
(TA=25°C)
THI
(GaAlAs) Unit
Reverse Voltage VR 5 V
Forward Current IF 50 mA
Forward Current (Peak)
1/100 Duty Cycle
10us Pulse Width
iFS 1200 mA
Power Dissipation PD 80 mW
Operating Temperature TA -40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
THI
(GaAlAs) Unit
Forward Voltage (Typ.)
(IF=20mA) VF 1.3 V
Forward Voltage (Max.)
(IF=20mA) VF 1.6 V
Reverse Current (Max.)
(VR=5V) IR 10 uA
Wavelength of Peak
Emission CIE127-2007*(Typ.)
(IF=20mA)
λP 880* nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ 50 nm
Capacitance (Typ.)
(VF=0V, f=1MHz) C 90 pF
Operating Characteristics
(TA=25°C)
Part
Number
Emitting
Material Lens-color
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
min. typ.
XZTHI56W-1 GaAlAs Water Clear 1* 2.3* 880* 30°
Radiant Intensity
CIE127-2007*
(Po=mW/sr)
@20mA
*Radiant intensity value and wavelength are in accordance with CIE127-2007 standards.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
A SunLED www.5unLEDusa.ccm Relative Radiant Intensity Forward Current (ma) THI 1.0 Ta:25“C 0.5 0 750 800 850 900 950 1000 1050 wavelength 1, (nm) RELATIVE INTENSITY VS. CIE WAVELENGTH so 2 2.5 8 w £20 an 3‘3 1.5 H g an 321;“ 1,0 m ‘5; 0.5 5,5 0 £2” 0 0.51.5 1.2 M 1.5 1.3 o m 20 an m 50 Forward Volhgew) FORWARD CURRENT Vs. muwm VOLTAGE lrFm-wurd Current (m) mum mmnsm Vs. mkwmn cummm 50‘ so- 70‘ so- 90' 100' 40‘ 30- au- 10- o- Inna Rehuve mam: Imensny 05 ma o- 29- w- 60' 80' 100- 120' SPA’HAL msmnav'uo}! 2.5 20 1,5 m v.5 u 7m 720 o 20 40 so so Ambient Temperature Ta('C> mum- mmsm Vs, mam" TEMPERATURE Bellow Sammng Pmlfle (or 51m Products (Pb—Me Campamnu) sun (1‘) Note: u an m m m m 'fim n m) 1. lmmum loldnriu umpamun should not amend gun-c 2. Manama renew mnperalm* m-c—eau-c a, Do an pm um. n: In: epoxy mm din-mg nun lempemturel :nndlunm
Part Number: XZTHI56W-1
3.0x1.0mm INFRARED EMITTING DIODE
Mar 25,2016 XDSA5044 V9-Z Layout: Maggie L.
P. 2/4
THI
LED is recommended for reflow soldering and
soldering profile is shown below.
A SunLED www.5unLEDusa.com B.Oi0.3 ‘175101 3.5i0.05 V—TH E 1 5 2 1 5 0.9 ‘ m \ 0' m. o IzlAWzltuJi ‘1 I” 14*} \ f1, ,) \K‘i .114 - ‘ F—W ‘ 1.15:0.1 My
Part Number: XZTHI56W-1
3.0x1.0mm INFRARED EMITTING DIODE
Mar 25,2016 XDSA5044 V9-Z Layout: Maggie L.
P. 3/4
The device has a single mounting surface.
The device must be mounted according to
the specifications.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage or radiant intensity / luminous flux),
the typical accuracy of the sorting process is as follows:
1. Radiant Intensity / Luminous Flux: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters
A _ SunLED www.5unLEDusa.com \% 3E USER DIRECTION OF FEED 2,000pcs/Reel 1 Reel/Bag 5 6’ A SunVLED m OUTSIDE 7 LABEL W m 6). TLABEL SOK/BOX P/NU : XZxx56x
Part Number: XZTHI56W-1
3.0x1.0mm INFRARED EMITTING DIODE
Mar 25,2016 XDSA5044 V9-Z Layout: Maggie L.
P. 4/4
PACKING & LABEL SPECIFICATIONS
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp