Lighting Solutions

Hermaphroditic Blade and Receptacle Wire-to-Board and Board-to-Board Connectors

Features

• Available in 2, 4, and 6 positions
• Positive latching
• Connector accepts crimp snap contacts
• Contacts accept 18 – 22 AWG stranded wire
• Contacts packaged on 24 inch reels for high-speed lead termination
• Housings are bulk packaged
• Gold plated contact interface option

SlimSeal Connectors

Features

• Standard and mini versions available
• Available in 2, 3, and 4 positions
• SMT and through-hole
• Wire-to-wire and wire-to-board (vertical and right angle)
• 18 AWG to 24 AWG stranded wire
• Positive integral latching
• Polarized connectors
• Pre-assembled seals and wire guides
• IP67 rating
• UV resistance (wire-to-wire)

NECTOR S Line

Features

• 7.5 mm outer diameter of plug
• Connector system available in wire-to-wire and wire-to-board configuration
• 2 position connector available in multiple keying configurations
• 6-way distributor with additional switch feature
• Optional sealing boots available for water resistant applications

Board-to-Board Screw Down Jumper Assembly

Features

• 2-position connection assembly
• Connector assembly attachment to adjacent printed circuit board via screw to heat sink fully seats electrical contacts against printed circuit board pads
• Connector assembly fits onto 16.50 mm [0.650 in] wide printed circuit board
• 7.0 mm [0.276 in] printed circuit board spacing
• Registration features in connector assembly align with printed circuit board cutouts
• #6 screw (not included) used to secure connector assembly to tapped hole in heat sink or base; should be zinc-plated or equivalent protective coating to avoid corrosion
• Tube-packaged assemblies

SMT Poke-In Connectors

Features

• Modular, slide together design
• Available in multiple colors
• Available in standard and custom color configurations
• RoHS-compliant redundant SMT pads prevent peeling
• Rounded corners to minimize shadowing
• Side-to-side stackable with pads on 4 mm centers
• Accepts 18, 20, 22 AWG solid wire; 18, 20 AWG prebond stranded; 18 AWG stranded
• Cost-effective alternative to hand soldering wires
• Low profile design
• Flat top surface allows for vacuum pick up
• High-temperature material for reflow processing

High Power Inverted Thru Board Connector

Features

• Accepts 1.5 mm miniCT connector plugs
• Eliminates wire dress management issues with discrete wire leads around the top surface of LED printed circuit boards
• Available in 2, 3 and 4 positions to meet specific design requirements
• Low profile, top-surface height of 2.00 mm above the LED printed circuit board prevents interference with LED light emission
• High-temperature material supports reflow soldering process
• Rounded corners prevent shadowing to maximize LED light emission
• Tape-and-reel packaging allows for high-speed SMT processing
• Flat top surface design allows for vacuum pick up
• Surface-mount board locks provide stability during mating and unmating
• Accepts Economy Power II (EP II) UL rated 600 VAC connectors
• EP II connectors provide positive latching to help ensure proper mating and inadvertent unmating
• Connector is positioned in cutout or notch in the printed circuit board offering placement flexibility

Inverted Thru Board Connector

Features

• Low profile design
• Rounded corners to minimize shadowing
• Connector is positioned through cutout or notch in PC board
• Surface-mount hold-downs provide stability during mating and unmating
• High-temperature material for reflow process
• Flat top surface allows for vacuum pick up

Low Profile Micro MATE-N-LOK Connector System

Features

• Less than 4.7 mm in vertical height required
• Compact 3 mm centerline
• Right-angle surface-mount headers with surface-mount hold-downs
• Positive, side latching to prevent unmating
• 2, 3, and 4 positions available
• Black and natural colors available
• Utilizes standard micro Mate-N-Lok contacts with 24-20 and 30-26 AWG wire range

LIGHT-N-LOK Connector

Features

• Poke-in termination for 18 AWG solid wire for easy tool-less, field or factory installation
• Integral strain relief prevents inadvertent wire twist out and pull out
• Designed for hot plugging
• Snag-resistant rounded housings
• Compact connector housings: 2 position assembly fits through a 5/8” diameter knock-out opening; 3 position assembly fits through a 7/8” diameter knock-out opening
• Connector latches prevent unintentional disconnect of connector
• Standard 3/8” wire strip length
• Can be supplied as pre-assembled mated connector sets with or without factory-installed flying leads
• Product is marked (English/French) in support of CSA luminaire labeling requirements

COOLSPLICE Connectors

Features

• Field terminatable wire to wire splice
• Available for wide range of wire sizes
• Optional gel-filled sealing with IPx8 rated
• UL listed and KEMA approved
• No wire stripping
• Easy, one-time plier termination with built-in cap

AMP Mini CT Connectors

Features

• 2 kinds of termination method: IDC, crimp
• Discrete wire interconnect
• Circuits range from 2 - 40
• AWG 24~28
• Both T/H and SMT mounting styles are available
• Kinks for self-retention on boards

LUMAWISE Endurance N Dimming Receptacle

Features

• ANSI C136.41 compliant, fixture mount dimming receptacle
• Accepts ANSI-standard dimmable photocells to provide a connection between the photocell and the luminaire
• Available with two or four dimming contacts to support one- or two-channel dimming protocols
• Robust twist-lock contacts for a reliable power interconnect
• Receptacle comes pre-terminated with wire leads for ease of integration into new or existing light fixtures
• Available with 105°C and 150°C-rated wire insulation for varying temperature-rated luminaires

Power Double Lock Connectors

Features

• 1-12 position WTW or WTB
• Various centerline pitches
• Audible click when contact is fully inserted into the housing
• Polarizing ribs on plug housing allows for proper mating
• Solder tail kink along with the polarization peg feature
• Board-mounted headers are compatible with resin or conformal coatings
• UL recognized, CSA certified, and VDE approved

Universal MATE-N-LOK Connectors

Features

• 250 [6.35] centerline
• 600VAC or VDC, 19 A maximum
• 30 - 10 AWG wire range
• Available in tin or gold plating
• 2-10 in-line positions
• 6, 9, 12, 15 matrix
• Wire-to-wire (1-15 positions)
• Wire-to-board (2-15 positions)
• .200 [5.08] pitch
• Rated 250 VAC/VDC and 19 A

Micro MATE-N-LOK Connectors

Features

• 2, 3, and 4 positions available
• Black and natural colors available
• Less than 4.7 mm in vertical height required
• Polarized housings help prevent connector mismating
• Positive latching to prevent unmating
• Right angle surface mount headers with surface mount hold-downs
• Utilizes standard Micro MATE-N-LOK contacts

Mini-Universal MATE-N-LOK Connectors

Features

• 600 VAC or VDC, 9.5 Amp maximum
• 30 - 16 AWG wire range
• Available in tin or gold plating
• 9 Lb minimum contact retention
• Wire-to-wire, 1-15 positions
• Wire-to-board, vertical and right angle, 2-14 positions
• UL94V-0 and 94 V-2 rated housings available
• Available in a sealed version
• Vertical and right-angle pin headers
• Contacts are available in strip form or loose piece
• Splash-proof design for applications that require sealing

Economy Power Connectors

Features

• Positive audible latch designed for easier mating and unmating
• Polarization tabs help prevent post misalignment
• Broad portfolio includes 3.96 mm, 5.08 mm, 7.92 mm centerline families
• Asymmetrical terminals can only be loaded one way within housing
• Anti-fretting contact lubricant
• Glow wire materials available

LED Holders

Easy to use LED holders that integrate thermal, electrical, optical and mechanical connectivity.

TE supports a broad selection of LED manufactures and packages. Find your LED here today!

FB Series

Features

• Filters conducted power line noise
• Compact size ideal for lighting applications
• Compact size
• 277 VAC or VDC
• Strong differential mode performance
• Solid lead wires
• Ambient temperature 50°C

Tactile Switches

Features

• Variety of actuators and mounting types, 3.5 x 6 mm, 4.9 x 4.9 mm, 6 x 6 mm
• 12 x 12 mm sizes available
• 3 available actuation forces – 100/160/260 grams
• Through-hole and surface-mount types
• Good tactile fee

Rocker and Paddle Switches

Features

• Many styles of terminations, rockers, paddles, bezels, and mountings
• Ratings up to 16A at 125 VAC; 10A at 250 VAC
• Illuminated rockers available
• Agency approvals on high-current models
• Available in gold or silver plating

T9A Series General Purpose Power Relays

Features

• Up to 166 A inrush
• UL electronic ballast : 3 A, 120 V, 75 C, 15 K cycles
• UL tungsten: 15 A, 120 V

T9G Series General Purpose Power Relays

Features

• Rated current: 30 A
• Save PCB space with the smallest relay in its class while maintaining a standard footprint
• Help provide operator safety through increased insulation (UL 61810-1)

RTX Series Relay for High Inrush Switching

Features

• Efficiently switches peak inrush currents up to 320 A
• Flip-flop contact spring with tungsten pre-make contacts and silver-tin-oxide main contacts
• 1 Form A (NO) contact arrangement
• Compact size and energy-efficient latching design

RT, Inrush Series

Features

• 1 pole 16 A, 1 form A (NO) contact (W pre-make contact + AgSnO2)
• 10 A/250 VAC making and breaking capacity acc. to IEC 60669-1
• 165 A/20 ms inrush peak current
• Mono- or bi-stable coil
• 5 kV/10 mm coil-contact
• Reinforced insulation

EW60 PCB Relay

Features

• Can enable energy savings and provide low self-heating by a bistable magnetic system
• Different coil drive possibilities by 1- or 2-coil versions
• Achieve various coil drive possibilities with 1- or 2-coil versions
• Provide strong electronic ballast switching (50 k operations, NEMA 410-2011, 16 A or 20 A branch circuit rating)

ES2000 Dual Wall Heat Shrink Tubing

Features

• 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters
• Flame-retardant and mechanically tough, the tubing provides strain relief and abrasion protection of wire splices, terminals, and other components
• Thick adhesive liner forms an effective barrier against fluids and moisture and performs well at an extended temperature range
• UL recognized
• RoHS compliant