Titanium Ti375C529 Development Kit

Efinix's Titanium Ti375C529 development kit has everything needed to develop and prototype designs for the Ti375 FPGA. This kit showcases the Ti375's hardened RISC-V block with a 32-bit CPU featuring the ISA RISCV32I with M, A, C, F, and D extensions and six pipeline stages. The hard processor has four CPUs, each with a dedicated FPU and custom instructions. Additionally, the Ti375’s soft-core MIPI D-PHY supports up to 1.5 Gbps per lane and has hardened LPDDR4/4x controllers.

The Titanium Ti375C529 development board has two 512 Mbit SPI NOR Flash devices, which support SPI active (x1, x2, x4, and x8 modes) to configure the FPGA and store other user data such as RISC-V software. One SPI Flash device (U48) also supports SPI passive mode. A highly integrated Ethernet PHY is on-board supporting RGMII at up to 1,000 Mbps.

One key feature is the on-board USB-to-dual JTAG device that supports simultaneous debugging of the Ti375 FPGA and the RISC-V system on chip (SoC). Additionally, the board has an array of on-board interfaces, such as an FPGA mezzanine card (FMC) with low pin-count (LPC) connector interface and three PMOD interfaces, which expands the board's functionality. The QSE connectors on this development kit are compatible with the Efinix QSE daughter cards developed for the Ti60 and Ti180 development kits. They can be purchased separately to enhance the functionality of the kit.