BitSim NOW

About

BitSim NOW, is a leading design house in the development of advanced electronics for cameras, imaging and sensors, video/graphics and data acquisition. We help you to develop your camera, camera interface, network interface or other types of interfaces. The camera sensor might need a custom interface, or MIPI-CSI2, Camera link or just an SPI interface. Video is buffered on chip internal RAM or using external DDRx memory as well as Flash memory. To access the cloud or host computer, high speed internet access is needed. BitSim NOW can feed Video streams via the RTP protocol on top of our IP UDP Ethernet IP Block in 1G or 10G speeds, all accelerated in HW.

Imaging systems used to be based on PCs. Expensive cameras connected with cables into an expensive frame grabber in a big computer box running Windows.

A new way has evolved in recent years: low cost embedded systems based on Linux, handling both the camera sensors and the image processing as well as the host/cloud communication, all this in small packages.

At BitSim NOW we are doers. That means we handle the implementation part and get it to work: developing the hardware, translating an imaging design idea into algorithms, circuit boards, C/C++/Python code and accelerating functions in hardware based on powerful processing platforms including AI inference.

Additional E-mail Address: [email protected]

Additional Office Location: Sandv 2, SE-352 45, Växjö, Sweden

  • ASIC
  • DSP
  • Ethernet
  • FPGA
  • General Digital/Analog
  • High Density/BGA
  • PCB Design/Layout
  • Power Supply
  • Schematic Capture
  • USB
  • Video
  • Enclosure Design
  • PCB and Component 3D Modeling
  • Design for Manufacturing
  • Low to Medium Volume Production
  • Rapid Prototyping
  • Bootloader
  • C/C++
  • DSP Algorithms
  • Linux
  • Machine Learning
  • RTOS
  • VHDL/Verilog
  • Windows
  • Analog Simulation
  • Design for EMI/RFI Immunity
  • Design for Testability
  • Antennas
  • Bluetooth
  • GPS
  • RF Design
  • WiFi
  • Aerospace
  • Agriculture
  • Automotive
  • Food and Beverage
  • Industrial
  • IoT
  • Marine
  • Medical
  • Military
  • Oil and Gas
  • Transportation
  • AMD/Xilinx
  • AMD/Xilinx 
  • Analog Devices
  • Lattice
  • Microchip
  • Nordic
  • NXP
  • STMicro
  • Texas Instruments

Contact

BitSim NOW, part of Prevas
+46 8 54 55 56 00
Borgarfjordsg 13A, SE-164 40 Kista, Sweden
Niclas Jansson
[email protected]
The listing of any provider in the Design Services Providers Network does not constitute or imply an endorsement, sponsorship, or recommendation by Digi-Key of the third party, its Web site, or the information or services available from those sources or that it is suitable for your needs. Digi-Key is not responsible for the services or information obtained from any of these sources. This information is provided as a convenience for users of the Digi-Key web site. You must make your own decision based on your independent review regarding your interactions or communications with any of these providers.