Full Half-Bridge (H Bridge) Drivers

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Applications	Interface	Load Type	Technology	Rds On (Typ)	Current - Output / Channel	Current - Peak Output	Voltage - Supply	Voltage - Load	Operating Temperature	Features	Fault Protection	Mounting Type	Package / Case	Supplier Device Package
DRV8332HDDV IC HALF BRIDGE DRVR 5A 44HTSSOP Texas Instruments	25 In Stock	1 : $2,820.37000 Tube	-	Tube	Active	Half Bridge (3)	DC Motors, General Purpose	PWM	Inductive	Power MOSFET	260mOhm LS, 260mOhm HS	5A	7A	10.8V ~ 13.2V	0V ~ 52.5V	-55°C ~ 175°C (TJ)	Bootstrap Circuit, Status Flag	Current Limiting, Over Temperature, Short Circuit, UVLO	Surface Mount	44-PowerTSSOP (0.244", 6.20mm Width)	44-HTSSOP
DRV8332DKD IC HALF BRIDGE DRIVER 8A 36HSSOP Texas Instruments	0 In Stock	Obsolete	-	Tube	Obsolete	Half Bridge (3)	DC Motors, General Purpose	PWM	Inductive	Power MOSFET	80mOhm LS, 80mOhm HS	8A	13A	10.8V ~ 13.2V	0V ~ 52.5V	-40°C ~ 150°C (TJ)	Bootstrap Circuit, Status Flag	Current Limiting, Over Temperature, Short Circuit, UVLO	Surface Mount	36-BSSOP (0.433", 11.00mm Width) Exposed Pad	36-HSSOP
DRV8332DKDR IC HALF BRIDGE DRIVER 8A 36HSSOP Texas Instruments	0 In Stock	Obsolete	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	Half Bridge (3)	DC Motors, General Purpose	PWM	Inductive	Power MOSFET	80mOhm LS, 80mOhm HS	8A	13A	10.8V ~ 13.2V	0V ~ 52.5V	-40°C ~ 150°C (TJ)	Bootstrap Circuit, Status Flag	Current Limiting, Over Temperature, Short Circuit, UVLO	Surface Mount	36-BSSOP (0.433", 11.00mm Width) Exposed Pad	36-HSSOP

Showing

of 3

Devices in the bridge driver PMIC (Power Management Integrated Circuit) family incorporate two or more power transistors along with circuitry required to operate them as switches under the control of an external device. The transistors are typically configured internally in series-connected pairs known as half-bridges, such that the junction between any given pair can be connected to either of two power supply rails. They are commonly used to translate low-level signals provided by a control device such as a microcontroller into the higher power signals required to operate an actuator such as a stepper or brushless motor.