Texas Instruments

AMC1106M05/AMC1106E05 Delta-Sigma Modulators

Texas Instruments' AMC1106M05 and AMC1106E05 are small, basic, isolated delta-sigma modulator with ±50 mV input and CMOS interface

Image of Texas Instruments' AMC1106M05 Delta-Sigma ModulatorTexas Instruments' AMC1106 devices are precision, delta-sigma (ΔΣ) modulators with the output separated from the input circuitry by a capacitive isolation barrier that is highly resistant to magnetic interference.

The input stage of the AMC1106 is optimized for direct connection to shunt resistors or other low voltage-level signal sources commonly used in multi-phase electricity meters to achieve excellent AC and DC performance. The device low input voltage range of ±50 mV allows use of small shunt resistor values to minimize power dissipation. Decimate the output bitstream of the AMC1106 with an appropriate digital filter. The MSP430F67x, TMS320F2807x, and TMS320F2837x microcontrollers, and the AMC1210 integrate these digital filters for seamless operation with the AMC1106.

On the high-side, the modulator is supplied by a 3.3 V or 5 V power supply (AVDD). The isolated digital interface operates from a 3 V, 3.3 V, or 5 V power supply (DVDD).

The AMC1106 is specified over the extended industrial temperature range of -40°C to +125°C.

Features
  • ±50 mV input voltage range optimized for current measurement with shunt resistors
  • Manchester coded or uncoded bitstream options
  • Excellent DC performance for high-precision sensing on system level:
    • Offset error and drift: ±50 µV, ±1 µV/°C (max.)
    • Gain error and drift: ±0.2%, ±40 ppm/°C (max.)
  • 3.3 V operation for reduced power dissipation on both sides of the isolation barrier
  • System-level diagnostic features
  • High electromagnetic field immunity
  • Safety-related certifications:
    • 5657 VPK basic isolation per DIN V VDE V 0884-11 (VDE V 0884-11): 2017-01
    • 4000 VRMS isolation for 1 minute per UL1577
    • CAN/CSA No. 5A-component acceptance service notice, IEC 60950-1, and IEC 60065 end equipment standards

Applications

  • Shunt-resistor-based current sensing in 3-phase electricity meters

AMC1106M05/AMC1106E05 Delta-Sigma Modulators

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
IC SIGMA-DELTA MOD 16BIT 8SOICAMC1106E05DWVIC SIGMA-DELTA MOD 16BIT 8SOIC139 - Immediate$51.45View Details
IC SIGMA-DELTA MOD 16BIT 8SOICAMC1106M05DWVIC SIGMA-DELTA MOD 16BIT 8SOIC0 - Immediate$51.45View Details
IC SIGMA-DELTA MOD 16BIT 8SOICAMC1106E05DWVRIC SIGMA-DELTA MOD 16BIT 8SOIC0 - Immediate$38.53View Details
IC SIGMA-DELTA MOD 16BIT 8SOICAMC1106M05DWVRIC SIGMA-DELTA MOD 16BIT 8SOIC2560 - Immediate$43.63View Details

Evaluation Board

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
AMC1306 SMALL REINFORCED ISOLATEAMC1306EVMAMC1306 SMALL REINFORCED ISOLATE1 - Immediate$493.84View Details
Published: 2017-12-22

Related Videos

Texas Instruments 2024 electronica interview: Energy infrastructure applications
Texas Instruments 2024 electronica interview: Energy infrastructure applications

Publish Date: 2025-01-29

Texas Instruments 2022 electronica Interview – Enabling Smarter, Safer and More Scalable Robots of Tomorrow
Texas Instruments 2022 electronica Interview – Enabling Smarter, Safer and More Scalable Robots of Tomorrow

Publish Date: 2022-12-29

Isolation Basics: An Introduction to Standards and Terminology
Isolation Basics: An Introduction to Standards and Terminology

Publish Date: 2017-02-23

Related Product Highlight

ISO6731 General-Purpose 3-Channel 2/1 Digital Isolator Texas Instruments' ISO6731 general-purpose digital isolator is ideal for cost-sensitive applications requiring up to 5,000 VRMS isolation ratings.
THVD1520 5 V RS-485 Transceiver Texas Instruments' THVD1520 5 V RS-485 transceiver is suitable for industrial applications such as factory automation and control.
THVD15xx 5 V RS-485 Transceivers Texas Instruments' THVD15xx 5 V RS-485 transceivers are available in two speed grades suitable for data transmission up to 500 kbps and 50 Mbps respectively.

Related Articles and Blogs

In-Circuit Programming with the Texas Instruments LaunchPad Use the Texas Instruments MSP430G2553 and MSP-EXP430G2ET LaunchPad kit for in-circuit programming.
Use C2000 Real-Time MCUs to Develop Cost and Energy-Efficient EV Motor Power Control Designs Using C2000 series real-time MCUs and support tools and reference designs, designers can quickly and efficiently implement EV and HEV power control designs.
Motion Control Profiles: Good, Better, and Best Effective motor control requires careful adjustment of the motion profile parameters; advanced controllers ease the task and provide superior performance.

Related Product Training Modules

Communication Solutions for Industrial Automation Learn about communication interfaces on MSP430 MCUs for factory automation, their benefits, and solutions that will reduce development time.
Introduction to Real-Time Operating Systems and SYS/BIOS Discuss the differenece between a Standard Operating and Real Time Operating Systems as well as an overview of SYS/BIOS and Static Configuration.
MSP430 Support See how SYS/BIOS provides support for TI's MSP430 component, allowing it to perform faster and more efficiently.