T3DSO2000A Series Oscilloscopes

Product Highlights > T3DSO2000A Series Oscilloscopes

            T3DSO2000A Series Oscilloscopes
                    Teledyne LeCroy's T3DSO2000A oscilloscopes offer a maximum sample rate of 2 GSa/s and a maximum memory depth of 200 Mpts in half-channel mode
    

Image of Teledyne LeCroy's T3DSO2000A Series Oscilloscopes Teledyne LeCroy's Teledyne Test Tools T3DSO2000A oscilloscopes feature two-channel and four-channel models with analog bandwidth options from 100 MHz to 500 MHz. Each model offers a maximum sample rate of 2 GSa/s and a maximum memory depth of 200 Mpts in half-channel mode. All models incorporate two 2 GSa/s ADCs and two 200 Mpts memory modules. When all channels are enabled, each channel has a sample rate of 1 GSa/s and a standard record length of 100 Mpts. When only a single channel per ADC is active, the maximum sample rate is 2 GSa/s and the maximum record length is 200 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.

Key Features

100 MHz, 200 MHz, 350 MHz, and 500 MHz bandwidth models
Large 10.1 inch capacitive touch screen TFT-LCD color display with 1024 x 600 resolution
Real-time sampling rate up to 2 GSa/s
High-speed display technology

Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
Supports 256-level intensity grading and color display modes record length up to 200 Mpts
Digital trigger system

Standard serial bus triggering and decoding, supports protocols IIC, SPI, UART, CAN, LIN; optional CAN FD, FlexRay, I²S, MIL-STD-1553B.
50 MHz function/arbitrary waveform generator included as standard; built-in 6 waveform types (sine, square, ramp, pulse, DC, noise) and 45 arbitrary waveforms
Bode plot from 10 Hz to 50 MHz as standard using the T3DSO2000A 50 MHz function/arbitrary waveform generator or 10 Hz to 120 MHz using the T3AFG120 arbitrary function generator
Power analysis application included as standard, measuring power quality, current harmonics, inrush current, switching loss, slew rate, modulation, output ripple, turn on/turn off, transient response, PSRR, efficiency
Optional MSO,16 digital channels; record length up to 50 Mpts/Ch
High-performance 10-bit mode with typically 100 MHz bandwidth

Segmented acquisition (sequence) mode, divides the maximum record length into multiple segments (up to 90,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
Intelligent trigger: edge, slope, pulse width, window, runt, interval, time out, dropout, pattern, serial, and video
Zone trigger: up to 2 zones with user-defined Intersect/Not Intersect events
Video trigger, supports HDTV
Low background noise with voltage scales from 500 µV/div to 10 V/div
History waveform record (history) function, maximum recorded waveform length is 90,000 waveforms
Automatic measurement function for more than 50 parameters as well as measurement statistics, zoom, gating, math, history, and reference functions
10 Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square Root, average, Enhanced Resolution, and formula editor)
Two math operators allowing two math functions to be used at the same time
High-speed hardware-based Pass/Fail function
T3DSO2502A supports 2 channels at up to 500 MHz and 4 channels at < 350 MHz
Multiple interface types: USB Host, USB Device (USB-TMC), LAN, Trigger In/Out
Supports SCPI remote control commands
Supports multi-language display and embedded online help