Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
SINAMICS G120X series belongs to the well-proven family of SINAMICS converters.
Diotec's application note for Industrial Motor Control and Drives contains dedicated power semiconductors for the entire inverter circuit starting from the input rectifier.
Diotec offers a wide range of silicon based, power discrete components such as small signal, high voltage, transient protection, current limiting, Schottky, Zener diodes and transistors.
Diotec offers a new product portfolio of MOSFETs and linear voltage regulators fitting perfectly into a broad range of industrial lighting applications.
Compact, secure, and compatible with standard RF interfaces – built for high-reliability in harsh conditions.
High power battery packs operate safely and efficiently by using robust contactors to carry and isolate electricity.
Small, high power battery packs operate safely and efficiently by using robust contactors to carry and isolate electricity.
This paper presents a simulation of a common mode choke and compares the results with real-world measurements.
When purchasing a class II Multilayer Ceramic Capacitor from any manufacturer, the nominal capacitance is specified in the datasheet using specific measurement parameters such as frequency, AC voltage, and DC voltage.
This application note discusses the usage of Bourns Thick Film on Stainless Steel (TFOS) technology in a fuel cell stack sensor board application.
Application note for bipolar power supply and isolated signal transmission with MagI³C-FIMM.
The purpose of this article is to provide a basis for understanding the origin and propagation of common-mode interference and an approach based on a formula for designing a simple filter to minimize common-mode interference.
In the field of safety and security, PbS and PbSe detectors play a crucial role in flame and fire detection systems via detection of infrared radiation emitted by flames, allowing for early detection of fires.
Our applications range from high reliability LEDs to high performance detection across the entire spectrum including spectroscopy, position sensing, color measurements, wearable technologies, inspection and metrology.
Opto Diode offers a range of visible and near-infrared LEDs (emitting at common inspection wavelengths like 630 nm, 685 nm, 850 nm, and 940 nm) that are optimized for high output power, controlled beam angles, and rugged thermal performance.
In the photolithography sector, DUV photodiodes are instrumental in semiconductor manufacturing. They are used in lithography systems for controlling the exposure of photoresist to UV light, which is a crucial step in the process of creating microelectronic circuits on silicon wafers.
Reliability and top performance connectivity for asset tracker designs enabled by Virtual Antenna® technology.
This paper outlines why the overcurrent or short circuit protection in high-speed designs requires additional current limiting.
This application note outlines the reasons 5G network towers require effective surge protection. It also helps guide engineers in selecting the right SPD by determining potential risks, protection levels and standards.
The paper addresses the critical vulnerability of these systems to lightning-induced surges, which can lead to costly downtime and damage to sensitive electronics.
IQD quartz based frequency products shelf life application note.
IQD specifying disciplined OCXOs application note.
Quartz Crystals are used across the electronics industry to produce an accurate and stable frequency reference
IQD specifying rubidium oscillators application note.
IQD timekeeping with quartz crystals application note.
Holdover, in the context of oscillators, refers to the ability of an oscillator to maintain a clocks’ accuracy for a certain period when it temporarily loses its primary reference signal.
IQD specifying clock oscillator SPXO application note.
IQD ultrasonic cleaning of PCBs with quartz based products.
Unveiling the Precision and Power-Efficiency of the Pletronics SM22K/33K/44K 32.768KHz CMOS Crystal Oscillator Series
Modular plugs for flat and circular cables, chassis sockets for THT and SMT soldering. For signal and low load currents up to 2 A.
This application note aims to give some general insights into how to drive a DC motor using Nexperia Power MOSFET devices.
This application note describes a 300 mA discrete LED driver, based on a buck-converter principle, with a cycle-by-cycle current control.
This application note describes different components of power dissipation and how they may be calculated.
This application note presents the self-protective and diagnostic capabilities of MOSFET power switches. It also details their use cases, features, and some notes on increasing the current capability of a circuit via MOSFET paralleling.
This application note provides an overview of electrical machine use in vehicles. PMSM and BLDC operating principles are detailed.
This application note describes the advantages of multiphase machines.
This application note introduces Nexperia electrothermal MOSFET models. Details are provided on how to use them in simulations.
This application notes details the scalability and growth of the technology as well as the quality and reliability of Nexperia GaN FETs.
This application note gives details of four methods of reverse battery protection (RBP) that can be used in 12 V automotive systems.
This paper gives several worked examples showing how junction temperatures can be simply calculated using the device Zth curves.
This application note focuses on the application of the MOSFET in an airbag system, the airbag operating conditions will be discussed as well as the MOSFET safe operating area (SOA) curve and different MOSFET technologies.
This application note examines the effect of applying a selection of conducted battery line transients to Reverse Battery Protection (RBP) circuits that use an N-Channel MOSFET.
Hong Kong, China