Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
Application note for bipolar power supply and isolated signal transmission with MagI³C-FIMM.
The purpose of this article is to provide a basis for understanding the origin and propagation of common-mode interference and an approach based on a formula for designing a simple filter to minimize common-mode interference.
From flame detection to tracking greenhouse gases like methane (CH₄) and carbon dioxide (CO₂), PbS and PbSe detectors deliver fast, reliable measurements critical for safety and compliance.
In the field of safety and security, PbS and PbSe detectors play a crucial role in flame and fire detection systems via detection of infrared radiation emitted by flames, allowing for early detection of fires.
Our applications range from high reliability LEDs to high performance detection across the entire spectrum including spectroscopy, position sensing, color measurements, wearable technologies, inspection and metrology.
These photodiodes are designed to measure EUV light wavelengths, most commonly emitted during solar flares and coronal mass ejections.
Opto Diode offers a range of visible and near-infrared LEDs (emitting at common inspection wavelengths like 630 nm, 685 nm, 850 nm, and 940 nm) that are optimized for high output power, controlled beam angles, and rugged thermal performance.
Opto Diodes IR & NIR LED portfolio spans a wide range of center wavelengths from 700 nm to 940 nm, with narrow to wide emission angles, enabling precise optical coupling and target illumination.
In the photolithography sector, DUV photodiodes are instrumental in semiconductor manufacturing. They are used in lithography systems for controlling the exposure of photoresist to UV light, which is a crucial step in the process of creating microelectronic circuits on silicon wafers.
Reliability and top performance connectivity for asset tracker designs enabled by Virtual Antenna® technology.
This paper outlines why the overcurrent or short circuit protection in high-speed designs requires additional current limiting.
This application note outlines the reasons 5G network towers require effective surge protection. It also helps guide engineers in selecting the right SPD by determining potential risks, protection levels and standards.
The paper addresses the critical vulnerability of these systems to lightning-induced surges, which can lead to costly downtime and damage to sensitive electronics.
IQD quartz based frequency products shelf life application note.
IQD specifying disciplined OCXOs application note.
Quartz Crystals are used across the electronics industry to produce an accurate and stable frequency reference
IQD specifying rubidium oscillators application note.
IQD timekeeping with quartz crystals application note.
Holdover, in the context of oscillators, refers to the ability of an oscillator to maintain a clocks’ accuracy for a certain period when it temporarily loses its primary reference signal.
IQD specifying clock oscillator SPXO application note.
IQD ultrasonic cleaning of PCBs with quartz based products.
Unveiling the Precision and Power-Efficiency of the Pletronics SM22K/33K/44K 32.768KHz CMOS Crystal Oscillator Series
Modular plugs for flat and circular cables, chassis sockets for THT and SMT soldering. For signal and low load currents up to 2 A.
This application note aims to give some general insights into how to drive a DC motor using Nexperia Power MOSFET devices.
This application note describes a 300 mA discrete LED driver, based on a buck-converter principle, with a cycle-by-cycle current control.
This application note describes different components of power dissipation and how they may be calculated.
This application note presents the self-protective and diagnostic capabilities of MOSFET power switches. It also details their use cases, features, and some notes on increasing the current capability of a circuit via MOSFET paralleling.
This application note provides an overview of electrical machine use in vehicles. PMSM and BLDC operating principles are detailed.
This application note describes the advantages of multiphase machines.
This application note introduces Nexperia electrothermal MOSFET models. Details are provided on how to use them in simulations.
This application notes details the scalability and growth of the technology as well as the quality and reliability of Nexperia GaN FETs.
This application note gives details of four methods of reverse battery protection (RBP) that can be used in 12 V automotive systems.
This paper gives several worked examples showing how junction temperatures can be simply calculated using the device Zth curves.
This application note focuses on the application of the MOSFET in an airbag system, the airbag operating conditions will be discussed as well as the MOSFET safe operating area (SOA) curve and different MOSFET technologies.
This application note examines the effect of applying a selection of conducted battery line transients to Reverse Battery Protection (RBP) circuits that use an N-Channel MOSFET.
A silicon photomultiplier is a semiconductor device that can detect light and convert it into a current signal. Its basic building blocks are single photon avalanche diodes, also referred to as Geiger-mode avalanche photo diodes.
This application note has provided helpful information on how the Riedon™ fuse block by Bourns is modular through both fuse styles, while also explaining the safety and simplicity of their installation.
Whether the application is industrial or required for today’s emerging, renewable energy sectors, this application note has provided the important considerations designers need to make when selecting an ammeter shunt resistor.
This paper has outlined how the thermoelectric effect is formed between dissimilar metal junctions in the presence of a temperature gradient.
Coto's app note on the importance of magnet protection within harsh environments.
Coto's application note on their RedRock® TMR magnetic sensor technology.
This note will provide typical values for the maximum voltage, current, and power handling capabilities of various coaxial connectors, ensuring users can select the appropriate connector for their needs
App note from KEMET for infotainment and METCOM inductors.
Hong Kong, China