VideoLibrary

DC to DC Converters and Power Brick Heat Sinks

John O'Day of Advanced Thermal Solutions sits down with Peter Resca to discuss power brick DC-DC power converters which are an essential part of PCB design and their performance requires a stable temperature for optimum performance.

7/7/2016 9:13:03 PM

DC to DC Converters and Power Brick Heat Sinks

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
1/8 BRICK HEATSINK 58X23X6.1MMATS-1178-C1-R01/8 BRICK HEATSINK 58X23X6.1MM133 - Immediate$95.99View Details
FULL BRICK HEATSINK 61X118X20MMATS-1151-C1-R0FULL BRICK HEATSINK 61X118X20MM2342 - Immediate$213.13View Details
1/8 BRICK HEATSINK 58X23X22.9MMATS-1181-C1-R01/8 BRICK HEATSINK 58X23X22.9MM343 - Immediate$133.69View Details
1/8 BRICK HEATSINK 23X58X6.1MMATS-1183-C1-R01/8 BRICK HEATSINK 23X58X6.1MM34 - Immediate$105.95View Details
1/8 BRICK HEATSINK 23X59X11.4MMATS-1184-C1-R01/8 BRICK HEATSINK 23X59X11.4MM274 - Immediate$120.27View Details
1/8 BRICK HEATSINK 23X58X22.9MMATS-1186-C1-R01/8 BRICK HEATSINK 23X58X22.9MM407 - Immediate$132.95View Details
1/4 BRICK HEATSINK 58X37X6.1MMATS-1098-C1-R01/4 BRICK HEATSINK 58X37X6.1MM90 - Immediate$118.62View Details
1/4 BRICK HEATSINK 58X37X11.4MMATS-1099-C1-R01/4 BRICK HEATSINK 58X37X11.4MM913 - Immediate$120.68View Details
1/4 BRICK HEATSINK 58X37X22.9MMATS-1101-C1-R01/4 BRICK HEATSINK 58X37X22.9MM198 - Immediate$164.97View Details
1/4 BRICK HEATSINK 37X58X6.1MMATS-1138-C1-R01/4 BRICK HEATSINK 37X58X6.1MM176 - Immediate$130.56View Details
1/4 BRICK HEATSINK 37X58X11.4MMATS-1139-C1-R01/4 BRICK HEATSINK 37X58X11.4MM700 - Immediate$148.42View Details
1/4 BRICK HEATSINK 37X58X22.9MMATS-1141-C1-R01/4 BRICK HEATSINK 37X58X22.9MM351 - Immediate$163.98View Details
1/2 BRICK HEATSINK 61X58X6.1MMATS-1103-C1-R01/2 BRICK HEATSINK 61X58X6.1MM2 - Immediate$137.39View Details
1/2 BRICK HEATSINK 61X58X11.4MMATS-1104-C1-R01/2 BRICK HEATSINK 61X58X11.4MM2607 - Immediate$132.78View Details
1/2 BRICK HEATSINK 61X58X22.9MMATS-1106-C1-R01/2 BRICK HEATSINK 61X58X22.9MM63 - Immediate$183.08View Details
1/2 BRICK HEATSINK 58X61X6.1MMATS-1143-C1-R01/2 BRICK HEATSINK 58X61X6.1MM20 - Immediate$132.95View Details
1/2 BRICK HEATSINK 58X61X11.4MMATS-1144-C1-R01/2 BRICK HEATSINK 58X61X11.4MM22 - Immediate$156.24View Details
1/2 BRICK HEATSINK 58X61X22.9MMATS-1146-C1-R01/2 BRICK HEATSINK 58X61X22.9MM0 - Immediate$185.14View Details
FULL BRICK HEATSINK 117X61X6.1MMATS-1108-C1-R0FULL BRICK HEATSINK 117X61X6.1MM5 - Immediate$156.90View Details
FULL BRICK HEATSINK 117X61X11.4MATS-1109-C1-R0FULL BRICK HEATSINK 117X61X11.4M412 - Immediate$178.88View Details

Related Product Highlight

Brick Heat Sinks ATS has produced a broad array of high performance heat sinks, based off of the patented maxiFLOW™ design.

Related Articles and Blogs

Thermal Conductivity: What is it and Why You Should Care A discussion on thermal conductivity, how to calculate it, and how to best remove heat energy from electrical components to prolong their lives.
Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
maxiFLOW Power Brick Heat Sink Technology ATS’s power brick heat sinks are engineered to create minimum pressure drop and maximize fin surface area
maxiFLOW™ Heat Sinks maxiFLOW heat sinks feature a low profile spread fin array that maximizes surface area. Available in a wide variety of sizes and shapes.