STMicroelectronics

X-STM32MP-GNSS1 MPU Expansion Board

STMicroelectronics' STM32 MPU expansion board features the Teseo-LIV3FL GNSS module

Image of STMicroelectronics X-STM32MP-GNSS1 MPU Expansion BoardSTMicroelectronics' X-STM32MP-GNSS1 is an STM32 MPU expansion board that features the Teseo-LIV3FL module for low-power, multi-constellation GNSS positioning using various sensors for data accuracy.

The X-STM32MP-GNSS1 interfaces with the STM32MP microprocessor via 40-pin GPIO connector pins using I²C, UART, and GPIO connections for various components. It is compatible with both the STM32MP157F-DK2 and Raspberry Pi's GPIO connector layout. The Teseo-LIV3FL is a global navigation satellite system (GNSS) standalone low-power module. It embeds the Teseo III positioning receiver IC that works simultaneously on multiple constellations (GPS/Galileo/Glonass/BeiDou/QZSS).

The iNEMO inertial module ISM330DHCX has a full-scale acceleration range of ±2 g, ±4 g, ±8 g, and ±16 g and a wide angular rate range of ±125 dps, ±250 dps, ±500 dps, ±1000 dps, ±2000 dps, and ±4000 dps. The Qvar-embedded ILPS22QS functions as a digital output barometer, supporting dual full-scale up to 4060 hPa. The IIS2MDC is a high-accuracy, ultra-low-power 3-axis digital magnetometer with a dynamic range of up to ±50 gauss.

Features
  • ST25R3916B NFC card reader IC
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general-purpose LEDs and one key for user interface
  • EEPROM for automatic GPIO setup and driver setup
  • Compatible with STM32MP157F-DK2, STM32MP135F-DK, and Raspberry Pi’s GPIO connector

X-STM32MP-GNSS1 MPU Expansion Board

ImageManufacturer Part NumberDescriptionPlatformTypeFunctionAvailable QuantityPriceView Details
GNSS AND INERTIAL SENSORS EXPANSX-STM32MP-GNSS1GNSS AND INERTIAL SENSORS EXPANSDiscoveryRFGlobal Navigation Satellite System (GNSS)5 - Immediate$74.85View Details

Associated Parts

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
TESEO-LIV3FL LOW POWER MODULETESEO-LIV3FLTESEO-LIV3FL LOW POWER MODULE770 - Immediate$15.18View Details
INEMO INERTIAL MODULE: ALWAYS-ONISM330DHCXTRINEMO INERTIAL MODULE: ALWAYS-ON12799 - Immediate$6.95View Details
SENSOR 58.89PSIA 24BIT 10HLGAILPS22QSTRSENSOR 58.89PSIA 24BIT 10HLGA7052 - Immediate$3.31View Details
DISCOVERY STM32MP157F CRYPTO BRDSTM32MP157F-DK2DISCOVERY STM32MP157F CRYPTO BRD85 - Immediate$109.48View Details
Published: 2024-04-30

Related Videos

STMicroelectronics 2024 embedded world video
STMicroelectronics 2024 embedded world video

Publish Date: 2024-05-28

STM32MP1 Primer – Day 5
STM32MP1 Primer – Day 5

Publish Date: 2022-03-04

STM32MP1 Primer – Day 3
STM32MP1 Primer – Day 3

Publish Date: 2022-03-02

Related Product Highlight

X-STM32MP-GNSS2 GNSS MPU Expansion Board STMicroelectronics' X-STM32MP-GNSS2 is an STM32 MPU expansion board with a Teseo-LIV4F module for low-power multi-constellation GNSS positioning.
X-STM32MP-NFC08 NFC Evaluation Board STMicroelectronics' X-STM32MP-NFC08 NFC evaluation board embeds an NFC card reader IC and includes an antenna etched on the PCB with associated tuning circuit.
Teseo-LIV3FL Tiny GNSS Low-Power Module STMicroelectronics' Teseo-LIV3FL module is an easy-to-use global navigation satellite system (GNSS) standalone module.

Related Articles and Blogs

Using a MEMS Sensor for Vibration Monitoring The use of vibration monitoring reduces the risk of fatal damages and potential line-down situations. MEMS sensors could be the best solution.
Do You Really Need All That Raw Sensor Data? No! There’s a Better Way Use smart sensors to reduce data sets and allow your applications to focus less on raw measurements and more on events of interest.
Rapidly Deploy Sensors for IIoT-Based Predictive Maintenance Using MEMS Accelerometers Capacitive MEMS accelerometers ease design and lower cost of vibration monitoring for predictive maintenance in industrial applications.