ADE9430 High-Performance, Polyphase Energy, and Monitoring IC

Analog Devices' ADE9430 is an integrated temperature sensor with 12-bit successive approximation register (SAR) ADC

Image of Analog Devices' ADE9430 High-Performance, Polyphase Energy, and Monitoring ICADI's ADE9430 is a highly accurate, fully integrated, polyphase energy and power quality monitoring device. Superior analog performance and a digital signal processing (DSP) core enable accurate energy monitoring over a wide dynamic range. An integrated high-end reference ensures low drift over temperature with a combined drift of less than ±25 ppm/°C maximum for the entire channel, including a programmable gain amplifier (PGA) and an analog-to-digital converter (ADC).

The EVAL-ADE9430ARDZ is for use with the STM32 NUCLEOF413ZH. The EVAL-ADE9430ARDZ can be directly interfaced with current transformers and voltage leads, enabling the quick evaluation and prototyping of energy and Class S power quality measurement systems with the ADE9430.

Features
  • 7 high performance, 24-bit Σ-Δ ADCs
    • 101 dB SNR at 8 kSPS with PGA = 1
    • Wide input voltage range: ±1 V, 707 mVRMS full scale at gain = 1
    • Differential inputs
  • ±25 ppm/°C maximum channel drift (including ADC, internal VREF, PGA drift) enabling 10,000:1 dynamic input range, Class 0.2 metrology with standard external components
  • ±3°C accuracy from -40°C to +85°C
  • With the optional ADSW-PQ-CLS Power Quality Library, the complete IEC 61000-4-30 Class S power quality standard is implemented including:
    • Power frequency 10 sec. average
    • Magnitude of the supply
    • Dips and swells
    • Interruptions
    • Rapid voltage change
    • Flicker
    • Mains signaling voltage
    • Under deviation and over deviation
  • Voltage and current
    • Magnitude
    • Harmonics
    • Interharmonics
    • Unbalance
    • THD
    • Waveform recording
  • Optional ADSW-PQ-CLS Power Quality Library compatible with Arm® Cortex® microcontrollers
  • VRMS one-cycle and IRMS one-cycle refreshed each cycle
  • VRMS and IRMS filtered and updated every sample
  • 10 cycle rms/12 cycle rms
  • Period registers to calculate line frequency, one per phase
  • Zero crossing and zero-crossing timeout
  • Phase angle measurements
  • Supports CTs
  • Multipoint phase and gain compensations for CTs
  • Rogowski coils with the addition of an external analog integrator
  • Continuous resampled data available
  • Waveform buffer
  • Advanced metrology feature set
    • Total and fundamental active power, volt amperes reactive (VAR), volt amperes (VA), watthour, VAR hour, and VA hour
    • Total and fundamental IRMS and VRMS
    • Power factor
    • Supports active energy standards: IEC 62053-21 and IEC 62053-22, EN50470-3, OIML R46, and ANSI C12.20
    • Supports reactive energy standards: IEC 62053-23 and IEC 62053-24
  • High-speed communication port: 20 MHz SPI
  • Integrated temperature sensor with 12-bit SAR ADC

ICs

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
IC, FW POWER QUALITY SOLUTIONADE9430ACPZIC, FW POWER QUALITY SOLUTION260 - Immediate$195.92View Details
IC, FW POWER QUALITY SOLUTIONADE9430ACPZ-RLIC, FW POWER QUALITY SOLUTION0 - Immediate$118.23View Details

Evaluation Boards

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
NUCLEO-144 STM32F413ZH EVAL BRDNUCLEO-F413ZHNUCLEO-144 STM32F413ZH EVAL BRD5 - Immediate$164.56View Details
EVAL BOARD FOR ADE9430EVAL-ADE9430ARDZEVAL BOARD FOR ADE94300 - Immediate$4,756.45View Details
Published: 2022-11-01