Analog Devices Inc

AD5940 Analog Front End

Analog Devices' ICs feature integrated hardware accelerators for advanced sensor diagnostics

Image of Analog Devices' AD5940 Analog Front End Analog Devices' AD5940 analog front end incorporates both potentiostat and electrochemical impedance spectroscopy (EIS) functionality. The device features integrated hardware accelerators for advanced sensor diagnostics and best-in-class low noise for accurate sensor measurements, and is designed for wearable “always-on” applications. It is on a single chip, allowing for sensor measurement in both time and frequency domains.

Features
  • 2.8 V to 3.6 V supply
  • 1.82 V input/output compliant
  • Power-on reset
  • Hibernate mode with low power DAC and potentiostat amplifier powered up to maintain sensor bias
  • 3.6 mm × 4.2 mm, 56-ball WLCSP
  • Operating temperature range: -40°C to +85°C
  • SPI serial input/output
  • Wake-up timer
  • Interrupt controller
Applications
  • Electrochemical measurements
  • Electrochemical gas sensors
  • Potentiostat/amperometric/voltammetry/cyclic
  • Bioimpedance applications
  • Skin impedance
  • Body impedance
  • Continuous glucose monitoring
  • Battery impedance

AD5940 Evaluation Boards

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
EVAL KIT - BIO-IMPEDANCE/BIO-POTEVAL-AD5940BIOZEVAL KIT - BIO-IMPEDANCE/BIO-POT55 - Immediate$3,453.98View Details
EVAL KIT - ELECTROCHEMICALEVAL-AD5940ELCZEVAL KIT - ELECTROCHEMICAL19 - Immediate$3,453.98View Details

AD5940 Analog Front End ICs

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
IC AFE 1 CHAN 16BIT 56WLCSPAD5940BCBZ-RLIC AFE 1 CHAN 16BIT 56WLCSP3580 - Immediate$109.24View Details
IC AFE 1 CHAN 16BIT 56WLCSPAD5940BCBZ-RL7IC AFE 1 CHAN 16BIT 56WLCSP643 - Immediate$109.24View Details
Published: 2019-09-10

Related Videos

Arduino Basics - Electronics with Becky Stern | DigiKey
Arduino Basics - Electronics with Becky Stern | DigiKey

Publish Date: 2022-12-13

Related Articles and Blogs

Use Flexible AFE, Motion Control, and Authentication ICs to Design Point of Care Diagnostics Systems Designers need flexible and application-focused analog front-end, motion-control, and authentication ICs to realize point-of-care medical test benefits.
Higher Levels of Integration: Usually a Good Idea, But Sometimes Not Risks and specification tradeoffs to be considered when assessing using ICs with high functionality versus using basic building blocks.
Accelerate Industrial IoT Application Development—Part 2: Rapid IIoT Sensor Deployment Pre-configured industrial sensors units and gateways offer a simple solution for acquiring data needed to support IIoT application development.