RJE73 Series Brochure Datasheet by Amphenol ICC (Commercial Products)

Amphenol ”VHC > WHO 2"): Revision dale: May 6,2012 Amphenol

Revision date: May 6,2012 Page 1 of 2

Overview

This product specification defines the general use and performance parameters for Amphenol’s

RJE73 series of modular jacks.

Availability: Single port, shielded versions with and without EMI shield tabs available.

Usage

The RJE73 modular jacks supports Ethernet Protocols. Shielding available for increased EMI

performance and LEDs for Link Activity and Network Speed verification. High temperature reflow

type LEDs suitable for IR reflow.

Applications

Intended for use in applications such as:

Networking & Telecom

 Wireless (WiMAX)

 Network servers

 Hubs, routers, switches

Office & Home Equipment

 PC’s, Laptops, Copiers/Printers

 Telephones, modems

 Surge Protectors

 ATMs, Vending Machines

Consumer Goods

 Security Systems

 Set Top Boxes

 Video Game Systems

Miscellaneous

 Multi-Media Equipment

 Industrial Equipment

 POS Terminals

RJE73

Product Specification S6048C Rev 1.2

P/NRJE73‐188‐00441SHOWN

SINGLEPORTREGULARMOUNT,

WITHSHIELDANDLEDs

About Amphenol

Commercial Products

Amphenol’s commercial

connector products are

used in a variety of end

user applications

including networking,

telecom, server &

computer, storage &

HDD, consumer

electronics and

entertainment,

professional audio &

Industrial &

Military/Aerospace.

Related Products

RJHSE

RJSAE

P/NRJHSE‐3081SHOWN

SINGLEPORTVERTICALMOUNT,

NOSHIELD,WITHLEDs

P/NRJHSE‐5385‐02SHOWN

TWOPORTREGULARMOUNT,

WITHSHIELDANDLEDs

P/NRJSAE‐5385‐02SHOWN

STACKED2x1,8POSITION,

WITHSHIELDANDLEDs

Now yea,“ W! Electrical Characteristics Contact resistance: 20 m5! max. 1nsulation resistance: 500 M9 minimum at 500v DC for 2 minutes max. Current rating: 1.0 Amps Voltage rating: 125 Volts AC DWV 1000 VAC, 60 Hz. 1 min. LED forward DC current: 20mA typical LED forward Voltage: 1.9 Volts max. @ 2mA (for single colors) 2.6 Volts max. @ 20mA (for Bircolors) LED reverse voltage: 5 Volts minimum LED light intensity: 0.4 to 1.5 mcd @ 2mA (for single Colors) 0.5 mcd min. @ 2mA (for Birculors) LED wave length: Yellow: 587i 7 nm measured @ 20mA Green: 5651 6 rim measured @ ZOmA Red: 6251 5 rim measured @ ZOmA Mechanical Characteristics Mating connector insertion farce: 5.0 lbs. Maximum. Mating connector pull retention force: 20 lbs Minimum. Durability: 750 mating & unmating cycles Recommended soldering temperature: 245°C for 8 to 10 seconds max. operating temperature: 55* c to +85° c Material Requirements RJE73 connectors are RoHS compliant. Unless otherwise speciﬁed, the materials for each component shall be: lnsulator: ‘ - High Temp thermoplastic. Complies with UL 94ve0, Black color Contacts: - Phosphor Bronze hard temper with gold plating options 50p" minimum Nickel on contact mating area. - 100p" minimum matte tin plating on solder tails Shield: - Stainless steel with tin dipped tails LED: / - Tin plating on LED tails Available Documents Drawing Numbers: PeKJE73e188eDDXXX X Pusltlun Modular Jack. wltlr opllunal LEDs.and Shield Tubs, Cun|4c| rnotory or Anthonzed Amphenol representative for additional conﬁgurations swam swim WWH 5w Amphenol Canada Corp. Page 2 oi 2 605 Milner Avenue Toronto, Ontario, Canada. MlB 5xe Copyright © Amphenal Corporation zott . All rights reserved 41416 2914401 Amphenol n us occur/lam CONTAINS propnlamxv lNFORMAYlON AND sucn lNFORMAYlON MAV Nor no DISCLOSED m on IERS FOR my Pukmsrz OR user: rok MANUFACTURINO YURPOSES v. in tour 12. mrrw YERMISSION {ROM aw: lENOL CANADA um www.3mphenolcanada.cam

Amphenol Canada Corp. Page 2 of 2

605 Milner Avenue

+1 416 291 4401

www.amphenolcanada.com

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.

S6048C Rev 1.2

Electrical Characteristics

Contact resistance: 20 mΩ max.

Insulation resistance: 500 MΩ minimum at 500V DC for 2 minutes max.

Current rating: 1.0 Amps

Voltage rating: 125 Volts AC

DWV 1000 VAC, 60 Hz. 1 min.

LED forward DC current: 20mA typical

LED forward Voltage: 1.9 Volts max. @ 2mA (for single colors)

2.6 Volts max. @ 20mA (for Bi-colors)

LED reverse voltage: 5 Volts minimum

LED light intensity: 0.4 to 1.5 mcd @ 2mA (for single colors)

0.5 mcd min. @ 2mA (for Bi-colors)

LED wave length: Yellow: 587± 7 nm measured @ 20mA

Green: 565± 6 nm measured @ 20mA

Red: 625± 5 nm measured @ 20mA

Mechanical Characteristics

Mating connector insertion force: 5.0 lbs. Maximum.

Mating connector pull retention force: 20 lbs Minimum.

Durability: 750 mating & unmating cycles

Recommended soldering temperature: 245°C for 8 to 10 seconds max.

Operating temperature: -55° C to +85° C

Material Requirements

RJE73 connectors are RoHS compliant.

Unless otherwise specified, the materials for each component shall be:

Insulator:

 High Temp thermoplastic. Complies with UL 94V-0, Black color

Contacts:

 Phosphor Bronze hard temper with gold plating options 50µ” minimum Nickel on contact

mating area.

 100µ” minimum matte tin plating on solder tails

Shield:

 Stainless steel with tin dipped tails

LED:

 Tin plating on LED tails

Available Documents

Drawing Numbers:

P-RJE73-188-00XXX 8 Position Modular Jack, with optional LEDs,and Shield Tabs.

Contact factory or Authorized Amphenol representative for additional configurations

About Amphenol

Commercial Products

Amphenol’s commercial

connector products are

used in a variety of end

user applications

including networking,

telecom, server &

computer, storage &

HDD, consumer

electronics and

entertainment,

professional audio &

Industrial &

Military/Aerospace.