Engineering Resources
Featured Content
Introduction of DX07 series (Waterproof USB Type-C™ Receptacle).
The TMC5062-EVAL-KIT is a set of one MCU board "Landungsbrücke", a bridge board, and a TMC5062-EVAL driver board. It allows for a quick and simple start within only minutes to make your motor turn.
Designers of IoT connected devices, such as wearables, increasingly recognize the need for security and authentication in the face of threats to data confidentiality, integrity, and authenticity.
Learn how to safely discharge a capacitor using a multimeter and a resistor.
The MiWi Demo Kit enables developers to evaluate and experiment with 2.4 GHz, 868 MHz and 915 MHz RF solutions from Microchip.
Wireless IoT and wearable electronic products rely on low-power designs able to deliver extended battery life. Yet, tight power budgets bump up against the demand for more functionality.
E-Switch provides a look at their SS series snap action switch series.
This is a low-cost, small size, robust 200-VA DC to AC inverter based on TI’s MSP430G2553 and UCD8220-digitally managed push-pull controller. In this design, UCD8220 is used for a boost stage to get 250 V DC from a 12 V battery.
Current sense resistors, also called shunts, are the technology of choice for measuring current flow. In order to not adversely affect current flow, they have a small value that produces a proportionally small voltage across them.
The HG1120 is a high-performance MEMS based IMU designed to meet the needs of industrial markets ranging from AUVs, ground and aerial robotics, survey/mapping, stabilized platforms, transportation, and other autonomous applications.
The CDB5480U is an extensive tool designed to evaluate the functionality and performance of the Cirrus Logic CS5480 power/energy measurement device.
Featured Resources
App Note Archive
The engineering library contains thousands of quality application notes and white papers from Digi-Key manufacturers.
